Carvin Audio RX1200L-153-112 Powered Sound System with Monitor Package

adobe pdf icon          RX1200L manual.pdf

adobe pdf icon          LSseries_manual.pdf

Package Includes:
- one RX1200L 12-channel 1600W powered mixer
- two LS153 main speakers
- two LS112 monitor speakers
- four C50S 50' speaker cables
- two M68 mics & cables with mic clips



RX1200L Mixer:

The RX1200L 12 channel 1600w powered mixer features 4 power amps that deliver 400w each at 4 ohms or 300w at 8 ohms to give the R/L main speakers plenty of clean RMS power while delivering 400 watts to each of the Monitor 1 and 2 outputs through Speakon™ and 1/4-inch connectors. Features like the dual channel effects and dual 24 bit processors allow each channel to have two effects. Up to 2 optional mic or belt-pack dual diversity wireless systems can be plugged into the top eliminating cable clutter. A USB Power Port supports charging an iPod™ or panel light. Made in the USA.

LS153 3-way 15-inch Main / Monitor
Powerful 800W program design with clear mids. Ideal 3-way monitor design with big bottom. Great all in one compact go to box when you need it.
American designed and built quality
The LS high-end loudspeakers are American made in San Diego, CA. Each enclosure is designed, tuned, and tested using computer software for optimum system performance. Multi-ply Hardwood offers the strength for professional service. Professional Mylar crossover capacitors, high current coils and Speaker Guard high frequency driver protection are just part of the top quality design.
Full range main and monitor
The LS153 is a full range sound reinforcement multi purpose main and monitor. The 15-inch woofer, 6.5-inch mid range and 1-inch exit horn driver provide solid mid range clairity strong low end and crystal clear vocal reproduction and plenty of low-end to handle most main and monitoring needs. The 30 degree tilt is idea for near field monitoring, getting up close to the monitor. Also in the monitor position the horn is 90 degrees vertical for better front to back of the stage listening. The unique 3-way monitor cut provide both strong bass and drums playback with excellent vocals. Effective for both permanent and portable applications and covered in black DuraTuff™
 
Applications:

  • medium club Mains
  • House of Worship mains
  • Club monitors
  • Band mains and monitors
  • Bass player drum and vocal monitor
  • Pole mounted over an LS1801 or LS1801A for extended low frequency
  • DJ systems
Features:

  • Rugged and light weight poplar cabinet ready for a beating on the road
  • Black steel grill
  • High SPL performance crossover
  • 2 metal handles with round bar grip
  • 30 degree monitor cut for tight monitoring
  • Jack plates feature two twist lock and two 1/4-inch phone jacks wired in parallel
  • Built in San Diego, CA.

 

LS112 2-way 12-inch Main / Monitor
Powerful 600W program design. Use as mains and monitors for bands and house of worship. Excellent vocal monitor in a tight space.
American designed and built quality
The LS high-end loudspeakers are American made in San Diego, CA. Each enclosure is designed, tuned, and tested using computer software for optimum system performance. Multi-ply Hardwood offers the strength for professional service. Professional Mylar crossover capacitors, high current coils and Speaker Guard high frequency driver protection are just part of the top quality design.
Full range main and monitor
The LS112 is a full range sound reinforcement multi purpose main and monitor. The 12-inch woofer and 1-inch exit horn driver provides crystal clear vocal reproduction and plenty of low-end to handle most main and monitoring needs. The 30 degree tilt is idea for near field monitoring, getting up close to the monitor. Also in the monitor position the horn is 90 degrees vertical for better front to back of the stage listening. Effective for both permanent and portable applications and covered in black DuraTuff™
 
Applications:

  • Small club Mains
  • Youth Worship hall mains and monitors
  • Club monitors
  • Band mains and monitors
  • Pole mounted over an LS1801 or LS1801A for extended low frequency
  • DJ systems
Features:

  • Rugged and light weight poplar cabinet ready for a beating on the road
  • Black steel grill
  • High SPL performance crossover
  • 2 metal handles with round bar grip
  • 30 degree monitor cut for tight spot monitoring
  • Jack plates feature two twist lock and two 1/4-inch phone jacks wired in parallel
  • Built in San Diego, CA.

 

RX1200L Mixer: 

- Superb sound from 12 XLR low noise mic pre amps, plus one stereo channel with 1/4" R/L & RCA inputs 
- 4 power amps – R/L & Monitors 1&2 delivering 1600w RMS, 2400w peak power for large venues. Each amp delivers 400w RMS at 4 ohm, 300w RMS at 8 ohm. 
- Rack mountable - remove end-caps to install into a 5U or larger rack case 
- Speakon™ combo 1/4-inch connectors. 
- 5V USB power port for iPods™, MP3 players or USB LED lights 
- Professional Insert jacks at the push of a button on the first six channels 
- Variable GAIN controls adjust the input levels to eliminate noise & over driving 
- Active LOW, MID and HI channel EQ 
- Four 9 band Graphic EQ’s - R/L, plus Monitor 1 and 2 
- 2 DSP effect processors allow 2 effects at one time with over 256 effects each with controls sending the effects back to the floor monitors 
- +48V Phantom condenser mic power 
- Music Break switch allows back-ground music while the channels are muted. 
- AC input: 120V 60 Hz 
- Size: 19"W x 10.5"D x 10.3"H, 18 lbs. 
- Top slot for two optional UX600R receivers for mic or belt-pack wireless systems – eliminates the clutter 

 

LS153 Specs:

System Type:   15-inch, 6.5-inch, 3-Way, bass-reflex
Frequency Response:   53 Hz - 20 kHz (-10DB)
68 Hz - 18 kHz (-3 dB)
Coverage Pattern:   90H x 60V main, 60H x 90V in monitor position
Crossover:   3-Way with Speaker Guard™ HF
Crossover Frequency:   600Hz and 2.5 kHz
Power:   Full Range 400w continuous /800w program /1600w peak
Recommended Amplifier Power:   450 - 900w
Sensitivity (1w @ 1m):   98dB
Maximum SPL:   130dB
LF Driver:   15-inch woofer
MF Driver:   6.5-inch woofer
HF Driver:   1-inch exit titanium
Nominal Impedance   8 ohms
Enclosure:   15mm Multi-Ply Hardwood
Suspension/Mounting:   pole mount
Finish:   Black DuraTuff™
Transport:   2 Recessed Handle
Grill:   Black Powder-Coated Steel
Connectors:   Two twist lock connectors and Two ¼ TS phone jacks
Dimensions:   674mm (26.5") high, 445mm (17.5") wide, 394mm (15.5") deep
Net Weight:   18.6 kg (40.8 lbs)

LS112 Specs:

 

System Type:   12-inch 2-Way, bass-reflex
Frequency Response:   55 Hz - 20 kHz (-10DB)
76 Hz - 18 kHz (-3 dB)
Coverage Pattern:   90H x 60V main, 60H x 90V in monitor position
Crossover:   2-Way with Speaker Guard™ HF
Crossover Frequency:   2.5 k Hz
Power:   Full Range 300w continuous /600w program /1200w peak
Recommended Amplifier Power:   450 - 900w
Sensitivity (1w @ 1m):   96dB
Maximum SPL:   127dB
LF Driver:   12-inch woofer
HF Driver:   1-inch titanium
Nominal Impedance   8 ohms
Enclosure:   15mm Multi-Ply Hardwood
Suspension/Mounting:   pole mount
Finish:   Black DuraTuff™
Transport:   2 Recessed Handle
Grill:   Black Powder-Coated Steel
Connectors:   Two twist lock connectors and Two ¼ TS phone jacks
Dimensions:   572mm (22.5") high, 362mm (14.25") wide, 362mm (14.25") deep
Net Weight:   13 kg (28.4 lbs)