| /

SPEAK TO A SALES ENGINEER (M-F 8AM-3PM PST) 858-500-5060
*FREE SHIPPING - PLEASE ALLOW UP TO 14 DAYS FOR DELIVERY*


adobe pdf icon TRx5210AN User Manual
adobe pdf icon ALL DSP Software User Manual

  • Features:
    » IP45 Weather rating
    » Active dual 10-inch neodymium line array
    » Great clarity at high 130dB SPL output
    » 1550W - one 1000W + one 550W class D amplifiers
    » Frequency response 80Hz to 20,000 Hz
    » Ethernet™ ALL DSP™ network
    » Large audiences with up to 16 elements per side
    » High level projection for far field applications
    » Ground stack with quick release pins to TRx5118A subwoofer
    » 64 Lbs with lightweight neodymium 10-inch drivers

    The TRx5210AN element is a trapezoidal design that provides smooth, mid-field projection. Its advanced design evolving from Carvin’s previous models offers extended high frequency resolution with a new PurePath™ wave-guide lens, 3-inch voice coil, and 1.5-inch exit HF driver. The low-end performance is provided by two Neodymium 10-inch transducers. The ALL DSP™ enhances vocals and instruments offering crystal-clear, natural acoustics right out of the box with no special turning required. Up to 130 dB with 100º horizontal distribution offers high level projection for large audiences.


TRx5210AN LINE ARRAY

Advanced design from Carvin’s decades of audio experience offers extended high frequency resolution with a new PurePath™ wave-guide lens, 3-inch voice coil, and 1.5-inch exit HF driver. The low-end performance is provided by two Neodymium 10-inch transducers. ALL DSP™ processing and network connections ensure total control over your system.

Advanced Processing

The ALL DSP™ enhances vocals and instruments offering crystal-clear, natural acoustics right out of the box with no special turning required. Up to 130 dB with 100º horizontal distribution offers high level projection for large audiences

High Power Solution

The powerful CLASS D 1000W & 550W amplifiers provide extra headroom. They are 97% efficient, allowing up to 4 elements per 120VAC 20A circuit. 2 female/male AC POWERX IP65 rated weather connectors daisy chain up to 4 elements to one 20A 120VAC circuit.

IP45 Weather Rating

Ingress Weather Protection IP45 rating is standard on the TRx5210AN line array. The thick DURATEX™ polyurethane outer skin provides UV and moisture protection. The TS10N-8 10-inch neodymium woofers employ a moisture resistant coating. The grill is treated to prevent water damage and the rear amp panel features a rain hood and watertight AC connections. Optional rain box is available providing complete protection for permanent outdoor installations.

Connections

2 audio XLR connectors (female/male) daisy chain to all elements. Easy deployment for live events or installations comes from the multi-angle rear center bar that adjusts in 1º steps up to 10º.  4 to 16 elements per side are recommended for flying applications. Ground stack up to 4 elements on the TRx5118A for smaller venues.

Ground Stack

Ground stack up to 4 TRx5210AN line array elements on top of one or two TRx5118A subwoofers. There are three angle options available when ground stacking. Choose from 5° upward, 0°, and 3° downward angles.

ALL DSP NETWORK

The TRX5210AN line array features control software from ALL DSP™.  The software allows the user to create and save presets into the line array. The TRX5210AN ships with 5 factory tuned presets which include Front Fill, 4 Box, 6 Box, 8 Box, and 12 Box presets. For installations, the installer may want to create a tuning preset in the line array. Signal level, power on/off and mute can be controlled remotely through the network.

TRANSPORT

The optional steel DB521018 Transport Dolly Board allows a block of up to four TRx5210AN speaker cabinets or two TRx5118A subwoofers to be conveniently transported in a pre-rigged configuration and is recommended as the most efficient way to truck and handle the cabinets.