EM901BATT Replacement Battery Compartment for EM901 Receiver

AC120S - Power Conditioner/Sequencer

$159.00 $299.00

          AC120S User Manual

• Overview
• Specifications
• Video/Reviews

• The ultimate all-in-one power conditioner, the AC120S provides ten outlets that sequentially power on and protect your gear on any stage. Much more than a surge suppressor, this unit is equipped with an EMI/ RFI line filter to provide you a hum-free show, while adjustable LED rack lighting helps you set up in the darkest venues.

  
  
  

   

   

   

• AC120S
  » TOTAL CURRENT RATING: 20 AMPS
  » OUTLET RATING: 15 AMPS
  » TOTAL NUMBER OF OUTLETS: 10
  » GROUNDING: 3 PIN GROUNDED TO AC INPUT GROUND
  » OPERATING VOLTAGE: 90-130 VAC
  » AC CORD LENGTH: 68"
  » AC DIGITAL VOLT METER: 3 DIGIT, 0 TO 999, RED LED
  » SURGE PROTECTION: 3 TRANSIENT/ SURGE ABSORBERS
  » MAXIMUM SURGE CURRENT: 6.5kA
  » ENERGY ABSORPTION: 140 J
  » SEQUENTIAL OUTLET SWITCHING TIME: 1,2,3 OR 4 SECONDS
  » SEQUENTIAL BY-PASS: YES
  » LIGHTS : 2 TUBES WITH 4-INCH EXTENSION. LED ARRAY
  » LIFE OF LED: +500,000 HOURS
  » AC FILTER TYPE: EMI
  » NOISE REDUCTION: 9dB @ 10kHZ, 41dB @ 100kHz, 102dB@ 10MHz.
  » INTERNAL WIRING: 12-GAUGE
  » CONSTRUCTION: BLACK STEEL CHASSIS
  » POWER CONSUMPTION: 5 WATTS
  » DIMENSIONS: 19”W x 11”D x 1.75”H NET WEIGHT: 11lbs

   

• 

   

  David Lussier
  Best in performance and value. I own two of these in my studio, the sequential power on/off feature and option to individually select outlets is so common sense it is genius.

  Bob Beedle
  I bought an AC120S Power Conditioner/Sequencer a year ago. Simply put, I love it! It’s an awesome piece of gear!

  Pete Williams
  Product works great. Good build quality. LED's are too bright. Pull out lights are much nicer than I expected. This would be a great device to hack if the microcontroller was mounted in a socket. I would love to control the relays with an Arduino board to give me more flexibility and to allow control of the unit with my iRule universal remote control system.

  Corey Wilkinson Montana
  This thing is rock solid. We have used it inside and outside and pulled it across the country! Not one problem. Ever! We have owned or used Furman, Crown, Monster etc and for the quality and value this thing beats them all."

  Aleks Shkuratkov Vancouver, WA

  "I've had this power conditioner for about three years now. And its been working great. I absolutely love the availability to switch any of the plugs from the front via the individual push-buttons (which control the internal heavy-duty switching relays). The sequenced power up/down is a very clever feature, and saves your gear (and the conditioner itself) from a large and harmful current spike, and prevents the potential nuisance tripping of the circuit breaker at the panel, as well as a nasty voltage sag (when the lights in your room go slightly dim for a second when you turn on something big). The build is very, very solid and for this price, this is absolutely THE best value for a power conditioner in this size/format. My AC120S currently powers my home recording rig, and I plan to get several more for our band gear."

  Jeff Treadwell Crockett, TX 

  "This is an awesome, solidly-built piece of gear, easily worth twice the price to protect your more expensive equipment. This is only my second purchase from Carvin, but it won't be the last!"

   

  Daryl Oregon
  "Absolutely fantastic. I purchased this item on sale from Carvin direct because the specs looked good and the price was right. I received my item 5 days from the time I ordered it. I opened the box and was pleased to find a heavy duty, professional looking piece of rack gear. It had a very fat power cable 12ga!! It was a little heavy, but all good electronics have some heft. With all the useful features, I really feel like this unit is an incredible value even at the regular price. It's a truly great example of American "built to last" craftsmanship and quality. Americans can manufacture a product of fine quality at a reasonable price point. Absolutely fantastic. Buy with confidence."

   

FDR60 Direct Box

$39.00 $79.00

          Direct Box & Cable Guide 

• Overview
• Reviews

• The FDR60 - Filter Direct Box or DI box (Direct Injection Box) as it is sometimes called is a gig bag essential. Featuring a quarter inch input and balanced XLR outputs, the FDR60 is lightweight, compact, and built to last. It converts your instrument’s line level signal into a balanced XLR signal to send to a mixing board. Need to route your bass to the front of house and your amp at the same time? Simply plug in your bass, connect one output to your bass amp and the other to the mixing board and you’re good to go. It’s also perfect for use with keyboards, synthesizers, and acoustic guitars equipped with piezo pickups.

  The FDR60 helps to eliminate ground buzz and hum and keeps your tone strong over long cable runs, ensuring that your performance goes off without a hitch. For added peace of mind, this unit also comes with an input attenuator and a ground lift.

  Features:
  1/4-Input & 1/4-Output
  Adjustable Attenuator
  Balanced XLR 3-pin male output
  Ground Lift with on/off switch
  Road worthy black anodized housing
  FDR60 Specifications :
  Input: 1/4-Inch 50k ohm unbalanced
  Outputs: 1/4-Inch (parallel with input) , XLR 3-pin male 600 ohm Balanced
  Frequency Response: 30Hz – 20kHz
  Attenuation : Yes , -20dB or -40dB
  Dimensions: 3.3” W (85mm) x 3.6 D” (92mm)
  Warranty: 90 Days
  

•  

  Customer Reviews

  Bernie Hynson Jr
  "I Own the Carvin DI box…….Simple, Extremely quiet, light weight….and….COST EFFECTIVE!!!! Every guitarist, bassist and keyboard specialist should have AT LEAST one of these little 'BEAUTIES' in your gig wire bag…..for continuous use and for 'EMERGENCIES!!!'”

  Rob Julian, CA
  "The FDR60 is built like a rock, we've been using Carvin gear at our church for years. Our old Carvin direct boxes have been used and abused over the years and still work perfect. We needed to pick up a couple more (for added instruments, we're still using and loving the old ones), and we're going to Carvin to get theirs. This is solid gear that lasts."

  Ed Freitas Carson City, NV
  "I do pro sound and sound for my my own band and these are great for virtually any acoustic instrument, keyboard or any other instrument that sounds better with the DI boost that these offer. I recommend these highly, especially at this sale price range."

•  

EM-RM 1U Dual Rack Mount Kit for two EM900

$45.00 $59.00

The EM-DR is a dual rack kit allowing 2 EM900 transmitters to be rack-mounted side-by-side. The rack ears attach with the included phillips head screws to the sides of the EM900. The center bar slides apart when the set screws...

EM-DR 1U Single Unit Rack Mount Kit for EM900

$39.00 $49.00

Mount your EM900 in your rack with this handy rack-mount kit. Holds one EM900 transmitter. Includes mounting hardware. 1 rack space.    Specifications: - 1RU - holds 1 EM900 Transmitter

UXGT - 1/4-inch Wireless Guitar Cable for UX Systems

$45.00 $65.00

  UX-GT User Manual The UX-GT guitar cable allows players to connect their instrument to the UX600B body pack or UX1200B wireless system, giving guitar players the freedom to move about the stage without the confines of a traditional instrument...

EM901 Receiver for EM900 In-Ear Personal Monitor System

$259.00 $389.00

          EM901 User Manual EM900 and EM901 have changed to 518-542Mhz Frequency operation.  This is not compatible with older 600Mhz frequency operating units. RECHARGABLE BATTERIES ARE NOT RECOMENDED FOR USE IN THIS PRODUCT. Add an Extra receiver...