| /

FOR MORE INFORMATION CALL 858-500-5060 (M-F 8AM-3PM PST)
*FREE SHIPPING TO LOWER 48 STATES*

adobe pdf icon TRx5210AN User Manual
adobe pdf icon TRx5118A User Manual
adobe pdf icon ALL DSP Software User Manual

  • System Includes:
    » 24 TRx5210AN 2000W Active dual 10-inch line array elements
    » 16 TRx5118A 2000W Active high output 18-inch subwoofer
    » 2 TRx5000FLY  Fly grid system for suspending the TRx5210AN
    » 14 DB521018 Steel transport dolly systems with 5" locking casters
    » 24 Edison to POWERX(IP65) Locking AC cables for TRx5210AN
    » 24 POWERX (IP65) female AC locking connectors for TRx5210AN
    » 16 POWERX5118A Edison to POWERX(IP65) male locking AC cable for TRx5118A
    » 16 POWERX5118JUMP(IP65) Female to Male AC OUT/IN connecting cable for TRx5118A
    » 24 XLR5210JUMP XLR jumper cable to connect TRx5210AN
    » 16 XLR5118JUMP XLR jumper cable to connect TRx5118A

    All systems include flyware, transport system, cables & free shipping. Scalable from 8 to 32 TRx5210AN line array elements with TRx5118A companion subs. Tuning presets are included, just select the position of the element and you’re ready to go – no tuning required. CARVIN has been in business since 1946, giving us decades of design experience.


TRX5210AN LINE ARRAY

Advanced design from Carvin’s decades of audio experience offers extended high frequency resolution with a new PurePath™ wave-guide lens, 3-inch voice coil, and 1.5-inch exit HF driver. The low-end performance is provided by two neodymium 10-inch transducers. ALL DSP™ processing and network connections ensure total control over your system.

ADVANCED PROCESSING

The ALL DSP™ enhances vocals and instruments offering crystal-clear, natural acoustics right out of the box with no special turning required. Up to 130 dB with 100º horizontal distribution offers high level projection for large audiences.

HIGH POWER SOLUTION

The powerful CLASS D 1000W & 550W amplifiers provide extra headroom. They are 97% efficient, allowing up to 4 elements per 120VAC 20A circuit. 2 female/male AC POWERX IP65 rated weather connectors daisy chain up to 4 elements to one 20A 120VAC circuit.

IP45 WEATHER RATING

Ingress Weather Protection IP45 rating is standard on the TRx5210AN line array and the TRx5118A subwoofer. The thick DURATEX™ polyurethane outer skin provides UV and moisture protection. The TS10N-8 10-inch neodymium woofers and TX18-8 woofers employ a moisture resistant coating. The grills are treated to prevent water damage and the rear amp panel features a rain hood and watertight POWERX AC connections. Optional rain box is available providing complete protection for permanent outdoor installations.

TS10N-8 10-inch woofer

The TRx5210AN feature two TS10N-8 woofers that feature large 63mm 2.5” copper voice coils with IP45 water resistance cones with extended bass to 60Hz. Premium neodymium magnets are standard.

HF75-8 3-inch HF Driver

The HF75-8 proprietary driver featured in the TRx5210AN contains a large 76mm 3” copper voice coil with a titanium diaphragm. Untainted HF passes through its large 1.5” horn exit into a PurePath™ lens extending to 20kHz.

TX18-8 18-inch Subwoofer

The TRx5118A subwoofer boasts a single TX18-8 high-powered driver that features a long excursion Flex-Air™ spider with a IP45 water resistance cone and 100mm 4” copper voice coil with massive 22lb. magnet structure.

GROUND STACK

Ground stack up to 4 TRx5210AN line array elements on top of one or two TRx5118A subwoofers. Achieve a total height of 94" when using two subwoofers. There are three angle options available when ground stacking. Choose from 5° upward, 0°, and 3° downward angles.

TRx5118A HIGH OUTPUT

The high output TX18-8 transducer provides deep bass projection up to 136dB SPL. To achieve the extreme levels, the 18-inch TX18-8 transducer features a long-excursion 4” (100mm) voice coil with a reinforced web edge and spider designed for continuous use.

2000W BRIDGED POWER

To ensure high SPL, there are 2 bridged 1000W CLASS D amplifiers delivering 2000W, which are 97% efficient and provide extended headroom for distortion-free performances.

TRANSPORT DOLLY BOARD

The optional steel DB521018 Transport Dolly allows up to two TRx5118A subwoofers or four TRx5210AN line array elements to be conveniently transported in a pre-rigged configuration and is recommended as the most efficient way to truck and handle the cabinets. The transport dolly is designed to connect the subwoofers to the transport frame using the QPTRx quick pin connectors which secures the shipment of your sound system during transport. The DB521018 comes with 5-inch caster wheels. Two wheels come with locks to keep the transport dolly in place. 

Product Details