Archive- Steve Vai Legacy3 Mini Stack VL3212B

Carvin Amplifiers Steve Vai Legacy 3 2x12-Inch 100w Tube Combo w Vintage30Carvin Amplifiers Steve Vai Legacy 3 2x12-Inch 100w Tube Combo w Vintage30Carvin Amplifiers Steve Vai Legacy 3 2x12-Inch 100w Tube Combo w Vintage30

adobe pdf icon           Legacy3_manual.pdf

Package Includes: 
- VL300 head with tan cover
- C212BE 2 X 12 cabinet
  (country-western vinyl and tan metal grille)
- C5S speaker cable

Carvin and legendary guitar virtuoso Steve Vai are proud to introduce the new Legacy 3 Series Amplifiers. This 100W all-tube 3-channel amp is the result of countless hours of design and development by Carvin engineers, working closely with Steve Vai, to develop the sound Steve demands and any guitarist can appreciate. The Legacy 3's circuitry combines the best elements of the Legacy I and Legacy II, in a compact chassis. Channel 1 & 2 are the same as the original channel 1 & channel 2 circuitry found on the Legacy I. Channel 3 is a 2nd lead channel with a high gain switch. Features of the Legacy 3 include a master volume control, which controls the volume of all 3 channels without affecting preamp gain settings; a variable, footswitch controlled master boost; variable, channel-assignable reverb; and internal LED lighting which can have different colors assigned to each channel, MIDI in/through compatible with standard MIDI controllers, effect loop, bias and impedance switches, and much more. 

Carvin's relationship with Steve Vai spans almost 30 years, and Steve's first signature amp, the Legacy I, debuted 13 years ago. In 2009, the Legacy II was released, which added a third channel and master volume, with circuitry engineered specifically to suit Steve's demanding requirements. The new Legacy 3 combines the best aspects of the Legacy I and Legacy II, in a compact chassis that's lightweight and easily transportable. The Legacy 3 incorporates the original circuitry of the Legacy I on channels 1 & 2, and channel 3 is identical to channel 2, functioning as a second lead channel with a high gain switch. A master volume knob controls the volume of all 3 channels without affecting preamp gain settings. Other new features of the Legacy 3 include a variable, footswitch controlled master boost; variable, channel-assignable reverb; and internal LED lighting which can have different colors assigned to each channel. As on the Legacy II, the Legacy 3 features a MIDI input/through connector, compatible with any standard MIDI controller. An RMS power switch adjusts the output from 100W to 50W or 15W, which facilitates the overdriven tone many players look for at lower volumes. EL34 tubes produce smooth distortion, responsive sound and excellent reliability. The rear bias switch allows installation of 5881 (6L6GC) if desired. Other features, including a speaker impedance switch, effects loop, post master and new pre master loops, standby switch, presence control and treble/mid/bass controls allow the ultimate in flexibility. The Legacy 3 head is also rack-mountable with optional brackets. 


VL300 Head in Vai Green (standard on VL3212G only) 

Features & Specifications:
- All-Tube, 3 Channel 100w Amp
- Rackmountable - lightest 100w in the industry
- Master Volume
- Foot switchable boost
- Ch 1 Clean Channel
- Ch 2 Drive Channel
- Ch 3 Drive Channel with high-gain switch
- Ch assignable Reverb
- 2 Effect Loops: 1 pre master & 1 post master
- MIDI In/Thru
- Red/Amber/Green backlit LEDs color changes with channel
- Output: 100/50/15 watts
- Output Imp: 4, 8, or 16 ohms
- 12AX7 preamp tubes
- 4 matched EL34 power tubes
- Optional Vai green
- Dimensions: 17" wide x 9" deep x 8.5" high
- Weight: 29 Lbs (13kgs)
- Made in USA

 

 

 

 

 

 

 

VL300 Head: 

- All-Tube, 3 Channel 100w Amp
- Rackmountable - lightest 100w in the industry
- Master Volume 
- Foot switchable boost
- Ch 1 Clean Channel
- Ch 2 Drive Channel
- Ch 3 Drive Channel with high-gain switch
- Ch assignable Reverb
- 2 Effect Loops: 1 pre master & 1 post master
- MIDI In/Thru
- Red/Amber/Green backlit LEDs color changes with channel
- Output: 100/50/15 watts
- Output Imp: 4, 8, or 16 ohms
- 4 12AX7 preamp tubes
- 4 matched EL34 power tubes
- Tan cover
- Dimensions: 17" wide x 9" deep x 8.5" high
- Weight: 29 Lbs (13kgs)
- Made in USA

C212E Cabinet: 

- Two Celestion Vintage 30 Speakers
- 120 watts
- 8 ohm impedance
- Metal corners
- Tan metal grill
- Country Western vinyl covering
- Built-in tilt-back stand (Note: the tilt-back feature does not support placing an amp head on top and is intended for tilt-back extension cabinet use only)
- Size: 26" wide x 10.25" deep x 17.5" high 
- Weight: 40 lbs
- Made in San Diego, California