Archive- Carvin XC3000 Stereo 2/3-Way Electronic Crossover

Carvin XC3000 3-way stereo electronic crossoveradobe pdf icon          XC3000 User Manual.pdf

The XC3000 was designed with the professional in mind, engineered and assembled in the U.S.A., using only high quality electronic components and uncompromising workmanship. The single rack space XC3000 provides the best available crossover networks consisting of a fourth-order state variable implementation of Linkwitz-Riley crossover alignments. This provides a 24 dB/octave slope while maintaining optimal phase integrity. The XC3000 contains a host of valuable features found in only the best professional audio equipment. These include a switchable 40Hz Sub Sonic filter, a 10x frequency multiplier, switchable Tri-Amp and Bi-Amp modes, balanced input and output connectors, and phase inversion switches. The XC3000 is designed for maximum signal quality and control, and will give you years of trouble free service.

Specifications: 

FREQUENCY RESPONSE: 20 Hz to 20k Hz ± 1 dB
THD: Less than .01% 20 to 20k Hz 
OUTPUT (BALANCED): +26 dBm
DYNAMIC RANGE: 112 dB
CHANNELS: Two Stereo 2 or 3 Way
INPUT GAIN CONTROL: One per channel
MAX. GAIN ABOVE INPUT SOURCE: 12dB
PEAK LED DETECTOR: Input detection at +16 dBm
SUB SONIC FILTER: 18 dB / Octave -3dB at 40Hz
CROSSOVER FILTER DESIGN.: 24 dB / Octave Linkwitz Riley
LOW / MID CROSSOVER FREQ.: One 50 to 10 Hz sweep per channel
MID / HIGH CROSSOVER FREQ.: One 600 to 10 k Hz sweep per channel
FREQ. MULTIPLIER: One x1 / x10 push button switch per channel
MULTIPLIER RANGE: x1 (95 to 1.6k Hz) and x10 (950 to 16k Hz)
INPUT IMPEDANCE: 22k ohms
INPUT CONNECTORS: Balanced XLR and balanced (stereo) 1/4" phone jacks
OUTPUT CONTROL: Three per channel (Low, Mid, HIgh Freq.)
OUTPUT IMPEDANCE: Less than 150 ohms
OUTPUT CONNECTORS: Balanced XLR
PHASE INVERSION: 3 Phase inverting switches per channel
MODE SWITCH: Bi-Amp or Tri-Amp position per channel
POWER REQUIREMENTS: 90 / 250 VAC 50-60 Hz auto switching
FUSE: 3 Amp 250v fast blow
DIMENSIONS: 19" wide x 5" deep x 1.7" high (1RU)
SHIPPING WT: 8 lbs

Reviews: 

Jack Warwick, RI 
"I've tried other x-overs and there always seems to be some kind of bleed through. The unit is very quiet and very precise with no bleed and I'm using it with my LS1501's and the LM153's in two way mode and couldn't be happier. I was very surprised considering the other top name brands didn't impress me. Another great product from Carvin!"