Archive- Carvin Audio XP1000L-PM15 8 Channel PA System

Carvin Audio XP1000L-PM15 Powered Sound System Package

adobe pdf icon          XP1000L Product manual

Package Includes: 
- XP1000L 10 Channel Powered Mixer
- 2 PM15 Speakers
- 2 M68 Mics & Cables
- 2 C50S Cables 

XP1000L Mixer: 

Unlike anything in its class, the ultra light XP1000L Stereo 8 Channel powered mixer offers 1200 watts RMS (1600W peak) power from 3 power amplifiers for Left, Right, and a third power amplifier for floor monitors. Each XP1000L includes a USB power port for an iPod™ (MP3 player) or LED panel light. What's more impressive is its high power in only 15 lbs using our light-weight DCM power amp technology. While at the same time, the high efficiency "Green" Class D power amplifiers conserve power. So not only is this a great high power lightweight mixer, but it is environmentally friendly and cheaper to operate. Each of the 3 amplifiers delivers 400w RMS (530w Peak) at 4 ohms or 300w RMS (400w peak) at 8 ohms. High current Speakon™ and 1/4-inch speaker connectors are featured assuring every watt gets to your speakers. Each amp has it own LED output meter plus peak indicator. 

Superb sound starts with 8 balanced XLR input channels, plus two channels with stereo inputs for a total of 10 inputs. Each channel features: professional low noise microphone pre amplifiers, Gain controls (first 6 channels), 3-band EQ, Effects, Main, and Monitor levels. The 6 continuously variable GAIN controls adjust the input levels to eliminate noise and input over-driving. Active Low Mid and Hi channel EQ controls plus three 7 band graphic EQ (R/L & Monitor) enhance intelligibility for Hi-Fi quality. The separate floor monitor graphic EQ allows the musicians to have their own EQ system and eliminate possible feedback associated with close monitoring. 2 internal DSP effects processors deliver over 256 effects each with independent level controls for both main L-R and for sending the effects back to the floor monitors.

XP1000L USB Light

Other features: 

- +48V Phantom power
- Music Break switch
- Durable all metal enclosure with protective end-caps
- Dimensions: 17" wide X 10" deep X 10.3" high
- Weight: 15 lbs
- Warranty: 1 Year
- Made in the USA 

PM15 Speakers: 

The PM15 is designed to stand alone as a full range sound reinforcement loudspeaker for small systems. The PM15 can be laid on it's side for a 60 degree angled stage monitor. Effective for both portable and permanent applications, featuring a 1-3/8" pole mount cup.

Applications include: 

- DJ system
- House of Worship
- Band PA
- Satellite system

The PM15 incorporates premium components housed in a rugged water resistant enclosure, designed for crystal clear sound in small to medium size venues. The high power drivers feature large magnet structures for high efficiency producing more output per watt than systems costing two to three times more. The woofer is protected by a heavy gauge steel powder coated grill. Two combination Speakon - 1/4" input jacks allow for versatile connections and chaining of speakers. Rubber foot pads on the bottom interlock with receptacles on the top for stacking two PM15s. The bottom pole mount cup offers universal mounting to pole stands and mounts.

Add a subwoofer
click here to see our subwoofers.

XP1000L Mixer: 

Frequency Response: Mic or Line Inputs 20Hz-20kHz ±1dB
Total Harmonic Distortion: Less than .1% at nominal levels 
Equivalent Input Noise: 150 ohm source: -117dBu 
Output Noise: -90dBu Master Line Out (All Levels Minimum) 
Output Headroom: +20dB 
Maximum Gain: Mic in to Master Line Out: 70dB 
Crosstalk: Adjacent channels -60db at 1KHz 
Common Mode Rejection: -78db at 1KHz 
Phantom Power: 48 volt @ XLR Mic channels 
USB Power Port: 5 volt, 200mA for LED lighting or MP3 charging 
Channel EQ 3-band active: LOW: 80Hz ±12dB, MID: 750Hz ±12dB, HI: 11.5KHz ±12dB 
Power Output: 1200w (3x400w@4ohms) (3x300w@8ohms)
Power Req.: 120VAC  60Hz 
Dimensions: 10.3" high x 17" wide x 10" deep
Weight: 15 lbs 

PM15 Speakers: 

System Type: 15-inch 2-Way, bass-reflex
Frequency Response: 72 Hz - 18 kHz (-10DB) 88 Hz - 17 kHz (-3 dB)
Coverage Pattern: 90H x 30upV x 45downV
Crossover: 2-Way
Crossover Frequency: 3 kHz
Power: 400W Continuous / 800W Program / 1600W Peak
Recommended Amplifier Power: 200w - 800w
Sensitivity (1w @ 1m): 96.5dB
Maximum SPL: 120dB / 126dB peak
LF Driver: 15-inch Woofer
HF Driver: 1-inch exit 1.5-inch VC Titanium Driver
Nominal Impedance full range: 8 ohms
Enclosure: Molded Plastic
Suspension/Mounting: 1-3/8-inch pole mount cup with clamp
Transport: 1 side handle
Grill: Black steel
Connectors: 2 combo Speakon - 1/4 inch jacks
Dimensions: 17.87" wide X 13.87" deep X 27.87" high
Weight (each): 37.6 lbs