XP1000L Product manual
LSseries_manual.pdf
Package Includes:
- 1 XP1000L 8 Channel Powered Mixer
- 2 LS153 3-Way Main Speakers
- 2 M68 Mics & Cables
- 2 C50S 50' Speaker Cables
XP1000L Mixer:
Unlike anything in its class, the ultra light XP1000L Stereo 8 Channel powered mixer offers 1200 watts RMS (1600W peak) power from 3 power amplifiers for Left, Right, and a third power amplifier for floor monitors. Each XP1000L includes a USB power port for an iPod™ (MP3 player) or LED panel light. What's more impressive is its high power in only 15 lbs using our light-weight DCM power amp technology. Each of the 3 amplifiers delivers 400w RMS (530w Peak) at 4 ohms or 300w RMS (400w peak) at 8 ohms. High current Speakon™ and 1/4-inch speaker connectors are featured assuring every watt gets to your speakers. Each amp has it own LED output meter plus peak indicator.
Superb sound starts with 8 balanced XLR input channels, plus two channels with stereo inputs for a total of 10 inputs. Each channel features: professional low noise microphone pre amplifiers, Gain controls (first 6 channels), 3-band EQ, Effects, Main, and Monitor levels. The 6 continuously variable GAIN controls adjust the input levels to eliminate noise and input over-driving. Active Low Mid and Hi channel EQ controls plus three 7 band graphic EQ (R/L & Monitor) enhance intelligibility for Hi-Fi quality. The separate floor monitor graphic EQ allows the musicians to have their own EQ system and eliminate possible feedback associated with close monitoring. 2 internal DSP effects processors deliver over 256 effects each with independent level controls for both main L-R and for sending the effects back to the floor monitors.
Other features:
- +48V Phantom power
- Music Break switch
- Durable all metal enclosure with protective end-caps
- Dimensions: 17" wide X 10" deep X 10.3" high
- Weight: 15 lbs
- Warranty: 1 Year
- Made in the USA
LS153 3-way 15-inch Main / Monitor
Powerful 800W program design with clear mids. Ideal 3-way monitor design with big bottom. Great all in one compact go to box when you need it.
American designed and built quality
The LS high-end loudspeakers are American made in San Diego, CA. Each enclosure is designed, tuned, and tested using computer software for optimum system performance. Multi-ply Hardwood offers the strength for professional service. Professional Mylar crossover capacitors, high current coils and Speaker Guard high frequency driver protection are just part of the top quality design.
Full range main and monitor
The LS153 is a full range sound reinforcement multi purpose main and monitor. The 15-inch woofer, 6.5-inch mid range and 1-inch exit horn driver provide solid mid range clairity strong low end and crystal clear vocal reproduction and plenty of low-end to handle most main and monitoring needs. The 30 degree tilt is idea for near field monitoring, getting up close to the monitor. Also in the monitor position the horn is 90 degrees vertical for better front to back of the stage listening. The unique 3-way monitor cut provide both strong bass and drums playback with excellent vocals. Effective for both permanent and portable applications and covered in black DuraTuff™
Applications:
- medium club Mains
- House of Worship mains
- Club monitors
- Band mains and monitors
- Bass player drum and vocal monitor
- Pole mounted over an LS1801 or LS1801A for extended low frequency
- DJ systems
Features:
- Rugged and light weight poplar cabinet ready for a beating on the road
- Black steel grill
- High SPL performance crossover
- 2 metal handles with round bar grip
- 30 degree monitor cut for tight monitoring
- Jack plates feature two twist lock and two 1/4-inch phone jacks wired in parallel
- Built in San Diego, CA.
XP1000L Mixer:
Frequency Response: Mic or Line Inputs 20Hz-20kHz ±1dB
Total Harmonic Distortion: Less than .1% at nominal levels
Equivalent Input Noise: 150 ohm source: -117dBu
Output Noise: -90dBu Master Line Out (All Levels Minimum)
Output Headroom: +20dB
Maximum Gain: Mic in to Master Line Out: 70dB
Crosstalk: Adjacent channels -60db at 1KHz
Common Mode Rejection: -78db at 1KHz
Phantom Power: 48 volt @ XLR Mic channels
USB Power Port: 5 volt, 200mA for LED lighting or MP3 charging
Channel EQ 3-band active: LOW: 80Hz ±12dB, MID: 750Hz ±12dB, HI: 11.5KHz ±12dB
Power Output: 1200w (3x400w@4ohms) (3x300w@8ohms)
Power Req.: 120VAC 60Hz
Dimensions: 10.3" high x 17" wide x 10" deep
Weight: 15 lbs
Wireless:Top slot for two optional UX600R receivers for mic or belt-pack wireless systems
LS153 Specs:
| System Type: |
|
15-inch, 6.5-inch, 3-Way, bass-reflex |
| Frequency Response: |
|
53 Hz - 20 kHz (-10DB)
68 Hz - 18 kHz (-3 dB) |
| Coverage Pattern: |
|
90H x 60V main, 60H x 90V in monitor position |
| Crossover: |
|
3-Way with Speaker Guard™ HF |
| Crossover Frequency: |
|
600Hz and 2.5 kHz |
| Power: |
|
Full Range 400w continuous /800w program /1600w peak |
| Recommended Amplifier Power: |
|
450 - 900w |
| Sensitivity (1w @ 1m): |
|
98dB |
| LF Driver: |
|
15-inch woofer |
| MF Driver: |
|
6.5-inch woofer |
| HF Driver: |
|
1-inch exit titanium |
| Enclosure: |
|
15mm Multi-Ply Hardwood |
| Suspension/Mounting: |
|
pole mount |
| Transport: |
|
2 Recessed Handle |
| Grill: |
|
Black Powder-Coated Steel |
| Connectors: |
|
Two twist lock connectors and Two ¼ TS phone jacks |
| Dimensions: |
|
674mm (26.5") high, 445mm (17.5") wide, 394mm (15.5") deep |
| Net Weight: |
|
18.6 kg (40.8 lbs) |
