$1,199.00 – Sold Out
The LT5204 5150W 4 Channel PFC Power Amplifier is a lightweight power amp which provides unlimited flexibility with pure amplification of the original signal source to extreme levels, covering all frequencies without added color. The LT5204 features a single space 1U frame, is 2 ohms capable, and includes PFC Power Factor Correction, which is internationally recognized as the foremost self-regulating power supply for high-end amplifiers. The LT5204 has exceptional headroom with lower power requirements than amps with a traditional power supply. Other models available in the LT Series are the LT2000 2010W 2 Channel PFC Power Amplifier, and the LT5800 2 Channel 5760W PFC Power Amplifier.
The LT5204 4ch model delivers 4x 440W RMS at 8 ohms, 4x 780W at 4 ohms and 4x 1290W at 2 ohms. The LT5204 may be configured into two bridged outputs to deliver 2575W into two bridged 4 ohms loads.
» Power: 4x440WRMS @ 8ohms, 4x780W @ 4ohms, 4x1290W @ 2ohms, 2x2575W Bridged @ 4ohms
» Active PFC Power Factor Correction
» Space saving lightweight 1-U frames
» High slew rate class D design
» Natural, pure-state amplification
» 2 ohm operation, 4 ohm bridged design
» For 70V/100V distribution systems
» Soft-Start 100-240VAC 50-60Hz
» PowerCON™ AC connector
» Front to rear cooling system
» Protect and Limiter circuits
» IEC60065 compliant, CB certified
» Up to 12 LT amplifiers in one 12U rack case
» 1 Year Warranty
PFC Power Factor Correction corrects the incoming AC power by synchronizing the AC voltage to the line current to reduce energy consumption and heat, which produces substantially more power from the same AC input.
Twist-Lock connectors are featured for high power applications. Secure the Twist-Lock cable connection by turning to the right to the lock position. Twist-Lock outputs are compatible with standard 2-conductor Twist-Lock cables. A 4 conductor Twist-Lock cable will enable bi-amping with one 4 conductor cable.
The PROTECT circuit will engage when the output load draws excessive current or a direct short is detected caused by a shorted speaker cable or speaker system. Thermal protection is also included in the PROTECT circuit. The LIMITER is designed to protect against distortion by automatically reducing the signal to prevent hard clipping, which helps protect the drivers. This feature can be turned off if desired.