Archive- S600B battery powered 150w(mono) / 400w(stereo) portable column array system

"The S600 performed like a pair of studio reference monitors; the bass was tight and full, the highs were clear and aesthetic, and the midrange was blissfully accurate for a PA system. I could hear the breath coming through the sax solo" – Kevin Gault  





The S600B StageMate™ is designed as a complete grab-and-go PA system using advanced speaker array technology. The smooth, linear sound carries far distances without the need for excessive volume close to the speaker. The coverage is up to twice that of conventional cabinets, and with less feedback.
   The system is easily expanded to stereo operation with the matching S648 speakers. For more demanding live and dance music, connect the Line Out XLR to powered subwoofers or connect directly to the house PA system.
   The S600B has the option to run on it’s internal rechargeable 12V battery allowing it to be used in remote locations as well as mobile applications.
   The 6-channel mixer is capable of receiving up to 11 different sources simultaneously. A variety of inputs includes Bluetooth® connectivity for audio playback, four XLR microphone inputs, high-impedance instrument inputs, stereo line input, 1/8” input for portable devices, and an optional UHF wireless mic/ or instrument receiver, which plugs directly into the accessory bay. Built in Echo, Reverb, and Chorus with Reverb effects add extra dimension to live performances.

S600 system set up

HOW DOES CDD™ (Constant Delivery Dispersion) speaker array technology WORK?


     When the listener is close, sound is heard from only one or two speakers lowering the volume heard. As the distance from the speakers increases, the sound is heard from all speakers working together. The arrangement of the speakers directs the sound waves to travel in a tighter pattern, which increases there output by a factor of two times compared to a conventional single speaker source.  For increased distance coverage, an S648 extension cabinet can be stacked on top of the S600B.



Output Power:

S600B - 150W

S600B + S648 Extension Speaker = 200W

S600B + (3)S648 Extension Speakers = 400W

Frequency Response: 60Hz-18kHz
Speaker Configuration: four 3.5”MF/HF, 8” Neodymium LF
Sensitivity: 93dB 1W/1M, 90dB 1W/2M, max SPL 118dB
Coverage: Horizontal: 110 deg. Vertical: 40 deg.
Enclosure:    Russian Baltic Birch
Finish:    Black Duratec™ coating
Grill:    Black powder coated steel
Input Impedance: 1/4” (Ch.1&2): 100K Ohms or Hi-Z switch: 500K Ohms
                                XLR: 2.2K Ohms, Stereo Inputs (Ch.5&6): 22K Ohms
Gain switch: +20dB (Ch. 1-4)
Phantom Power: +48V, switchable for Mics 3&4
Tone Controls: HI: 8.5kHz, +/-12dB
                            MID: 800Hz, +/-12dB
                            LOW: 70Hz, +/-12dB
Direct Out: Variable OFF to +4dBu, DC isolated, 100 Ohm gnd lift
DSP Effects:  Variable settings for Delay, Reverb, Chorus 
Protection:  speaker, thermal, over current, under voltage
Power Amp topology:  Class D
Power Supply topology:  High frequency switch mode
AC Power Requirements: 90 to 250VAC 50/60 Hz, 100VA
DC Battery Charge Input : 12-15VDC, 2A (car battery voltage with C12VDC cord)
Dimensions:   9.7”W x 11.5”D x17.25”H (246 x 292 x 438mm)
Mounting/Transport: top and bottom pole cups, integrated handle
Weight : 25.5 lbs. (11.6 kgs)
Warranty: One year parts and labor

Optional Accessories:
UX600: Wireless Mic/Instrument Receiver
CB601: padded bag w/wheels, CV600: vinyl cover
SS20, SS15: pole stands,
SS3: stacking pole
B600: replacement battery for S600B
C12VDC: charging cable for 12V vehicle outlet
S648 Extension Speaker
S610B Battery powered 10-inch subwoofer