Carvin's TRx 2000 Series loudspeakers are a high performance solution for bands, audio companies and concert venues. They feature the latest innovations for optimal performance of both live and music playback with the goal of providing the best sound at high SPL levels. These high performance systems are designed for today's pro audio applications and are protected by a 5 year warranty.
The TRx2153A is an active 2500 watt tri-amped, compact trapezoidal, 3-way enclosure. The trapezoidal design allows multiple cabinets to work together as an array cluster for very wide coverage. The horn loaded mid range and high frequency drivers offer tighter pattern control down to 500Hz for more precise clearer placement of audio where you want it. Twelve internal fly points provide connection for overhead suspension. The TRx2153A 3-way system will provide the best sonic details in the highs, mids, and low frequencies.
Large Format Drivers and Tour Grade Construction
The TRx2153A is equipped with our TS15-8, a high power cast 15-inch woofer featuring a 3-inch voice coil with a low heat high peak power capacity design, a horn loaded 8-inch mid range with a 2-inch voice coil, and a 1.4-inch High frequency large format driver with a 2.5-inch titanium diaphragm for clean and clear highs from 20khz all the way down to 1100Hz. The enclosure is constructed and braced with CNC machined 13-Ply Premium Russian Baltic Birch plywood. The front grill is powder coated steel with acoustically transparent foam backing for a cleaner look and added protection.
Active 2500W System
The 2500W Active, X-Drive DSP processed, tri-amp module features Input and Thru balanced XLR connectors, Input volume level, Terminal Block remote level/Mute Control, and Input and Thru locking IEC AC power plugs. The 2500 Watts is divided into four amplifiers a 1500W bridged amplifier pair for the 15-inch woofer, a 500W amplifier for the mid range 8-inch driver and a 500W amplifier the 1.4-inch exit high frequency driver. The internal X-Drive DSP processing maximizes performance output and protection using up to 48DB/oct crossover filters, parametric EQ, alignment delay, and limiters. The module features two selection buttons for the over all cabinet EQ mode and for the Bass mode.
The EQ mode has three selections:
- Normal or "flat response" mode for straight live sound applications were the sound should come from the performers and the mix, and not be changed by the speaker's response.
- Enhanced mode - for dance play back or a club setting with a minor mid cut and bass bump.
- Monitor mode - designed for stage monitoring or when coupling two cabinets together to keep bass and microphones under control. This is good for side fill applications and very small venues where the performer to speaker distance is small.
The Bass mode has three selections:
- Normal mode – In this mode the natural full power low end response is preserved. The flat response is kept intact, for straight live sound applications.
- Dynamic Extension- In this mode, the ultra low end will come alive lowering the cabinet's frequency response another 15Hz and boosting the 50-80Hz response. The DSP will control the output to keep this added response inside the limits of the speaker.
- External Sub – In this mode the low end is high passed at 85Hz for use with an external subwoofer.
Stack It or Fly It
Adding to the versatility of the TRx2153A are the multiple suspension points and foot receptors. The top of the cabinet features foot receivers for stacking TRx2153A speakers. Stacking can help with multi level coverage in events with both seated and standing or amphitheater seated audience. For permanent installation, 12 fly points are provided. The fly points are steel reinforced, captured 3/8in-16 nuts for use with eyebolts and shackles. Fly points on each side of the top and bottom can be used to suspend the cabinet and suspend another cabinet underneath. The top and bottom also include a rear fly point for pulling the cabinet back to create down or up angle coverage.
System Type: 2500W active tri-amp, X-Drive DSP processed, 15 Inch 3-way
Freq. Response: 50 Hz – 20 kHz (-10DB)
Coverage Pattern: 80H x 50V
Crossover: Tri-amp active DSP design
Crossover Frequency: 500 and 1.1 kHz
Sensitivity: 1.4Vrms, volume level full.
Power: 2500W 20ms burst (1500W, 500W, 500W)
Maximum SPL: 134 dB Peak
LF Driver: 15 Inch, 3 inch voice coil
MF Driver: 8-inch, 2 inch voice coil
HF Driver: 1.4-inch exit, 2.5 inch voice coil
Enclosure: 15mm 13 ply Russian Baltic Birch
Suspension: 12 captive 3/8in-16 nut fly points
Finish: Black DuraTec™
Grill: Black Powder-Coated Steel, Acoustically Transparent Foam Backing
Connectors: One XLR male and One XLR female, terminal block for remote volume/mute
Dimensions: 41" high x 19" wide x 17" deep
Net Weight: 83 lbs (38 kg)
Rigging Accessories: TCSHK10 3/8-16 Eyebolt, TCSHK58 5/8 Shackle
Made in the USA