Archive- Carvin Audio XP800L-PM10 6 Channel PA System

Carvin Audio XP800L-PM10 Powered Sound System Package

adobe pdf icon          XP800L Product manual

Package Includes: 
- XP800L Mixer
- 2 PM10 Speakers
- 2 M50 Mics & Cables
- 2 C50S Cables

XP800L Powered Mixer: 

The ultra light XP800L Stereo 6 Channel powered mixer features 8 inputs and an impressive 750 watts peak power from 2 amplifiers all in a compact 10 lbs enclosure. Each XP800L features a USB power port for an iPod™ (MP3 player) or LED panel light. Each amp delivers 250w RMS (375w peak) at 4 ohms or 140w (210w peak) at 8 ohms. Left and Right power amps can be switched to Main/Monitor driving both main speakers and floor monitors. With this much power, the XP800L can cover audiences up to 300 people. The high efficiency "Green" Class D power amplifiers conserve power so they are more environmentally friendly and cheaper to operate. Two 1/4-inch speaker connectors are featured on the front panel for fast set up.

Great sound starts with 6 balanced XLR input channels, plus two channels with stereo RCA inputs for a total of 8 inputs. Each channel features professional low noise microphone pre amplifiers, Gain switches (first 4 channels), 3-band EQ, Effects, Main and Monitor levels. The GAIN switch adjusts the input level for the optimal setting for both microphone and line level inputs. Active Low, Mid and Hi channel tone controls plus the stereo 7 band graphic EQ enhance the overall intelligibility. The internal DSP effect processor delivers over 256 effects with level controls for both main L-R and for sending the effects back to the floor monitors. 

Other features: 

- +48V Phantom power
- Durable all metal enclosure with protective end-caps
- Auto switching 120-240 VAC 50-60 Hz
- Dimensions: 13.5" wide X 9" deep x 7.5" high
- Weight: 10 lbs
- Warranty: 1 Year
- Made in the USA

The XP800L is the highest powered, lightest mixer on the market today. 

PM10 Speakers: 

The PM10 is designed to stand alone as a full range sound reinforcement loudspeaker for small systems. The PM10 can be laid on it's side for a 60 degree angled stage monitor. Coupling the PM10 with an subwoofer results in an ideal three way system with extended low end. Effective for both portable and permanent applications, featuring a 1-3/8" pole mount cup.

Applications include: 

- DJ system
- House of Worship
- Band PA
- Satellite system

The PM10 incorporates premium components housed in a rugged water resistant enclosure, designed for crystal clear sound in small to medium size venues. The high power drivers feature large magnet structures for high efficiency producing more output per watt than systems costing two to three times more. The woofer is protected by a heavy gauge steel powder coated grill. Two combination Speakon - 1/4" input jacks allow for versatile connections and chaining of speakers. Rubber foot pads on the bottom interlock with receptacles on the top for stacking two PM10s. The bottom pole mount cup offers universal mounting to pole stands and mounts.

XP800L Mixer: 

Frequency Response: Mic or Line Inputs: 20Hz-20kHz ±1dB
Total Harmonic Distortion: Less than .1% at nominal levels
Equivalent Input Noise: 150 ohm source: -117dBu
Output Noise: -90dBu Master Line Out (All Levels Minimum)
Output Headroom: +20dB
Maximum Gain: Mic in to Master Line Out: 70dB
Crosstalk: Adjacent ch’s: -60db at 1KHz
Common Mode Rejection: -78db at 1KHz
Phantom Power: 48volt @ XLR Mic channels
Channel EQ 3-band active: LOW: 80Hz ±12dB, MID: 750Hz ±12dB, HI: 11.5KHz ±12dB
Power Output: 2x250w RMS@4ohms, 140w RMS@8ohms
Power Req.: 120VAC 60 Hz or 240VAC 50 Hz auto switching
Dimensions: 13.5" wide x 9" deep x 7.5" high
Weight: 10 Lbs

PM10 Speakers: 

System Type: 10-inch 2-Way, bass-reflex
Frequency Response: 72 Hz - 18 kHz (-10DB) 88 Hz - 17 kHz (-3 dB)
Coverage Pattern: 90H x 30upV x 45downV
Crossover: 2-Way
Crossover Frequency: 3 kHz
Power: 250W Continuous / 500W Program / 1000W Peak
Recommended Amplifier Power: 100w - 400w
Sensitivity (1w @ 1m): 96.5dB
Maximum SPL: 120dB / 126dB peak
LF Driver: 10-inch Woofer
HF Driver: 1-inch exit 1.5-inch VC, Titanium Driver
Nominal Impedance full range: 8 ohms
Enclosure: Molded Plastic
Suspension/Mounting: 1-3/8-inch pole mount cup with clamp
Transport: 1 side handle
Grill: Black steel
Connectors: 2 combo Speakon - 1/4 inch jacks
Dimensions (H x W x D): 502 mm x 356 mm x 273 mm, 19.75 in x 14 in x 10.75 in
Net Weight (each): 10.4 kg (22.4 lbs)