Concert Series user manual.pdf
- one C1648P 16-channel powered mixer
- two LS2153 speakers
- two C50S cables
- two M68 mics & cables
The unveiling of the new C1648P Concert Series Powered 16-Channel Console demonstrates Carvin's commitment to professional live sound. The C1648P includes more channel sends and additional EQ capabilities than our previous Concert Series boards, with a total of 8 channel sends: 6 monitors and 2 effects. The 4-band channel EQ features dual sweep parametrics with LO MIDS and HI MIDS giving you greater control of your sound. The four main buses (groups) feature their own compressor/limiter with a Link switch for tracking two compressors together, which a big plus for controlling drums, choir, etc. The Concert Series is designed for installations such as churches and performance venues, or for touring sound systems. Careful attention has been given to the features, sound reproduction and mechanical construction, making Carvin's new Concert Series mixers the ideal choice for most live sound applications. Professional features, unsurpassed sound, rugged construction and a price that can't be beat make the C1648P the ideal choice for your live setup, and best of all, it's made in the USA.
Simplicity In Operation
Ease of operation is incredibly important. The C Series consoles are designed with the operator in mind. Everything is logically arranged. Simply plug-in the channels, adjust the monitor levels and bring up the main L/R faders and you're up and running. If you need EQ (tone changes), simply dial in the sound you want. The C Series is designed on a small-scale platform making it easy to transport. No other console offers more channels per linear inch.
Power To Spare
The C1648P has a lightweight internal power amp, based on Carvin's DCM2004L. This 2000W amp produces plenty of power, yet only adds 8 pounds to the total weight of the console. Protection circuits including Soft Start, Short Circuit, No Load, SpeakerGuard&trade:, Thermal Shut-Off, and Amp Peak Limiters protect your speakers, while protect and clip indicators warn you of any possible issues. The 4 powers amps produce 2000W (500W X 4) at 4 ohms, and 1200W (300W X 4) at 8 ohms.
USB connectivity allows for ease of recording using a single cable to record your L/R stereo mix direct to your computer. The digital interface gives you the highest quality audio output for recording. You can send audio from your computer into the console via USB. Set-up playlists on your computer for hours of automated playback through your sound system.
Onboard Wireless Capability
The exclusive optional UX600 built-in wireless systems allow the C1648P to have up to 2 wireless units, whether it be mic or belt-pack systems. The advantage of adding these options now or later is that the operator eliminates cable clutter and simplifies setup. The wireless units are automatically routed to channel 1 & 2 on the console plus the internal power supply. Each system is connected with a simple plug-in connector and screwed in for solid reliable performance.
Our Quality Control Department personally inspects every mixing console. After the physical inspection, the most critical and most important part of QC testing is running every channel, master section and connector through Audio Precision™ computers to verify every function. This means everything meets 100% of its specifications. This is great assurance that every EQ section, every output delivers the highest voltages with the lowest possible THD.
The engineering and design is what you'd expect from Carvin's high-end manufacturing. Ultra low-noise, high slew rate IC's for exceptional sound. Sealed controls and switches guard against the elements while the "SMT" Surface Mount Technology construction ensures the integrity of each component. The rugged chassis incorporates the integral SwitchMode™ 90V-260V 50-60 Hz power supply. The C1648P is made in the USA at our San Diego, CA facility.
C1648P With Optional RW1648P Case
The LS high-end loudspeakers are American made in San Diego, CA. Each enclosure is designed, tuned, and ported using LEAP™ software and tested with LMS™ software for optimum system performance. Multi-ply Hardwood offers the strength for professional service. Professional Neutrik™ Speakon connectors, Mylar crossover capacitors and Speaker Guard HF driver protection are just part of the top quality design.
The LS2153 is designed to stand alone as a full range sound reinforcement loudspeaker and to couple with our LS1801 for a three way extended low-end system. Effective for both permanent and portable applications, it comes with handles and rubber footpads. Covered in black DuraTuff™.
- Medium Club system
- High Power Drum Monitor
- House of Worship
- Band PA
The LS2153 is our smallest dual 15-inch high power enclosure that offers big stage performance. The tight footprint takes up very little room on stage and helps in packing them away. It makes a great drum monitor. The unique 3-way design uses one of the heavy duty 15-inch woofers for mid and low frequencies and the other for low frequencies only, providing cleaner mid frequencies and all the low-end punch of two 15-inch woofers. The high power extended range HF titanium driver delivers great clarity matching the woofers. The enclosure is constructed of CNC machined multi-ply Hardwood with heavy gauge steel powder coated front grills. The crossover includes 4 pin NL4 Speakon and 1/4" phone connectors mounted on FR4 double sided circuit boards for solid construction and durability. Carvin's exclusive Speaker Guard™ HF Driver protection uses a self resetting relay circuit to dim the HF driver 10 dB protecting the voice coil from excessive power. The benefits are the driver is not turned off losing all the high frequencies, the circuit resets as soon as the high frequency content is back to normal levels. Made in the USA.
- 6 monitor sends, 2 effects sends
- 4 band channel EQ with dual mid-sweep parametrics
- Two 5V USB power ports
- 4 bus compressor with link switches
Power: 2000w (500w X 4 @ 4 ohms); 1200w (300w X 4 @ 8 ohms)
Output Mode: 95% Efficeint Class D
Protection Circuits: Soft Start, Short Circuit, No Load, SpeakerGuard™, Thermal Shut-Off, Protect and Clip Indicators, Amp Peak Limiters
Freq. response: 20-20k Hz ±1 dB
THD distortion: .01% 20-20k Hz
E I N: -117 dBm
S/N Ratio: 90 dB
Dynamic Range: 104 dB
Mic Gain: 52 dB
Line Gain: 30 dB
Total Gain: 72 dB (balanced)
Max Output: +28 dBm
Power Req.: 120VAC 60Hz
Dimensions: 22.2" wide X 16.3" deep X 5.75" high (56.3cm wide X 41.5cm deep X 14.6cm high)
Weight: 25.1 lbs (11.4kg)
Made in San Diego, California
System Type: Dual 15-inch 3-Way, bass-reflex
Frequency Response: 45 Hz - 20 kHz (-10DB); 51 Hz - 18 kHz (-3 dB)
Coverage Pattern: 90H x 60V
Crossover: 3-Way with Speaker Guard™ HF protection
Crossover Frequency: 350Hz, 2.5 k Hz
Power: Full Range 800w continuous /1600w program /3200w peak
Recommended Amplifier Power: 450 - 900w
Sensitivity (1w @ 1m): 101dB
Maximum SPL: 130dB
LF Driver: 15-inch woofer
MF/LF Driver: 15-inch woofer
HF Driver: 1-inch 1.5" Dia. titanium
Nominal Impedance Full Range: 4 ohms
Bi-amp LF: 8 ohms 800w /1600w /3200w
Bi-amp LF/MF+HF: 8 ohms 50w /100w /200w
Enclosure: 15mm Multi-Ply Hardwood
Finish: Black DuraTuff™
Transport: 2 Recessed Handles
Grill: Black Powder-Coated Steel
Connectors: Two NL-4 Neutrik Speakons, Two ¼ TS phone jacks
Dimensions: 1110mm (43.75") high, 420mm (16.5") wide, 380mm (15") deep
Net Weight: 33 kg (73 lbs)