AG200 & AG300 series manual
300AGE 3-way 12-inch extension
For larger audiences, add the 300AGE extension cabinet. This can be stacked with the AG300 or mounted on a speaker stand with the built-in pole mount cup. The built-in stand allows you to tilt the cabinet upwards. Adding the 300AGE extention to your current AG200 or AG300 system will increase your ouput by more than twice. You can also increase your coverage by facing it in a direction different from your current AG200 or AG300. To add the 300AGE to your current system you simple plug a 1/4-inch speaker cable into the extension speaker output jack of your AG200 or AG300 and plug the other end into either of the two jacks on the back of the 300AGE. The 300AGE comes standard covered in marvelon vinyl covering. This projects the earthy tones of the accoustic world.
- Rugged Poplar plywood cabinet.
- 300W power handling.
- 12-inch low frequency driver planar loaded.
- 6.5-inch mid range driver.
- titainium high frequency driver.
- Dual 1/4-inch inputs jacks.
- Built in San Diego, CA.
FREQUENCY RESPONSE: 55 Hz - 18 kHz
Low Freq Driver: 12-inch driver
Mid Freq Driver: 6.5-inch driver
High Freq Driver: Titanium 1" horn driver
speaker impedance: 8 ohm
300 watts power handling
Dimensions: 17" wide X 12" deep X 18.5" high
Weight: 30.5 lbs.
Made in San Diego, California