Carvin LT5204 Power Amplifier 4 channels 5150W 2 ohm capable

LT5204 5150W 4 Channel PFC Power Amplifier

Name: LT5204 5150W 4 Channel PFC Power Amplifier
Brand: Carvin
SKU: LT5204
Price: 899.00 USD
Availability: InStock

$899.00 $1,099.00

| /

LT Series User Manual

Overview
Specifications
Video/Reviews

The LT5204 5150W 4 Channel PFC Power Amplifier is a lightweight power amp which provides unlimited flexibility with pure amplification of the original signal source to extreme levels, covering all frequencies without added color. The LT5204 features a single space 1U frame, is 2 ohms capable, and includes PFC Power Factor Correction, which is internationally recognized as the foremost self-regulating power supply for high-end amplifiers. The LT5204 has exceptional headroom with lower power requirements than amps with a traditional power supply. Other models available in the LT Series are the LT2000 2010W 2 Channel PFC Power Amplifier, and the LT5800 2 Channel 5760W PFC Power Amplifier.

The LT5204 4ch model delivers 4x 440W RMS at 8 ohms, 4x 780W at 4 ohms and 4x 1290W at 2 ohms. The LT5204 may be configured into two bridged outputs to deliver 2575W into two bridged 4 ohms loads.
» Power: 4x440WRMS @ 8ohms, 4x780W @ 4ohms, 4x1290W @ 2ohms, 2x2575W Bridged @ 4ohms
» 70V Distribution System: 900W x 2
» Active PFC Power Factor Correction
» Space saving lightweight 1-U frames
» High slew rate class D design
» Natural, pure-state amplification
» 2 ohm operation, 4 ohm bridged design
» For 70V distribution systems
» Soft-Start 100-240VAC 50-60Hz
» PowerCON™ AC connector
» Front to rear cooling system
» Protect and Limiter circuits
» IEC60065 compliant, CB certified
» Up to 12 LT amplifiers in one 12U rack case
» Net Weight: 22.4lbs
» 1 Year Warranty
"My amps did arrive in time for the weekend of gigs! They ran 8 channels of monitors for 12 hours a day all weekend, and worked perfectly. I can pick up the amp rack with one hand. I am very pleased and will be ordering more! I had been researching class D 4 channel amps to replace my 25 year old and very heavy QSC monitor racks. I have a few other older Carvin products (2 amps, a powered speaker, and some TRX boxes), so I immediately went to look at the spec sheets. They looked like they would be exactly what I wanted and I was correct! Thanks." Chris H. Reelaudio - GA

"The 1st LT5204 amplifier I installed at an office complex last week sounds great. This was a 70v line system with (6) in-ceiling speakers tapped at 15-watts each, & (2) sub woofers in-ceiling speakers tapped at 40-watts each on (2) amplifier channels. (2) other rooms are 8-ohms wall mount speakers (1) each on (2) amp channels... I was impressed." Don S. - TX

POWER FACTOR CORRECTION

PFC Power Factor Correction corrects the incoming AC power by synchronizing the AC voltage to the line current to reduce energy consumption and heat, which produces substantially more power from the same AC input.

Play video

% buffered

CRYSTAL CLEAR TRANSPARENCY

Crystal clear transparency is provided by CLASS D output stages featuring linear circuits with a near theoretical zero distortion level. Fast slew rate 50V/μs circuits produce power at extreme levels, delivering audio in its purest state with no added color.

SINGLE RACK SPACE FRAME DESIGN

Features include the 1U all steel 1.76” H X 19” W frame. The space saving lightweight design doubles amp rack capacities over traditional 2U designs.

POWERCON™ AC CONNECTOR

The twist-lock design of the PowerCON A/C connector is the professional standard for touring amplifiers.

ADVANCED AIR FLOW DESIGN

Cold air is drawn in from the front and expelled out the back, cooling the amp with cold air from the front of the rack.

CHANNEL INPUTS

The XLR balanced inputs help reduce signal interference and allow longer cable runs from your signal source (mixer, etc).

SPEAKER OUTPUTS

Twist-Lock connectors are featured for high power applications. Secure the Twist-Lock cable connection by turning to the right to the lock position. Twist-Lock outputs are compatible with standard 2-conductor Twist-Lock cables. A 4 conductor Twist-Lock cable will enable bi-amping with one 4 conductor cable.

PROTECT AND LIMITER CIRCUITS

The PROTECT circuit will engage when the output load draws excessive current or a direct short is detected caused by a shorted speaker cable or speaker system. Thermal protection is also included in the PROTECT circuit. The LIMITER is designed to protect against distortion by automatically reducing the signal to prevent hard clipping, which helps protect the drivers. This feature can be turned off if desired.

70V DISTRIBUTION SYSTEM Ready

The LT Series also accommodates for distribution systems. Connect a number of speakers with 70V transformers (in parallel) to the output of the amplifier to drive multiple loudspeakers in a given venue.

Carvin LT Amps have built in input sensitivity controls.

INPUT SENSITIVITY ADJUSTMENTS

Input Sensitivity adjustments allow you to decide how much input signal is required to achieve full power output from the amplifier. Choose from four levels of adjustment from +2dBu (.97V) to +12dBu (3V).

UNIVERSAL POWER SUPPLY DESIGN

AC voltages from 100-240VAC 50-60Hz are accommodated, including unregulated generators.

2 OHM STEREO / 4 OHM BRIDGE

The flexible design of the LT Series allows for both 2 ohm stereo and 4 ohm bridged operation.