The WG5 Wireless Guitar/Bass System is designed to give you the wireless freedom you have been looking for and the simplicity to make your life as a working musician easier. Compact design coupled with an intuitive, easy set up makes going wireless an enjoyable process. The WG5 works with both active and passive instruments and is perfect for both electric and acoustic guitar/bass.
WG5 SPECIFICATIONS » Number of Channels: 4 » RF Power: 5mW (7dBm) » Frequency Response: 20Hz-20kHz (-3dB) » Maximum Input Voltage : 2.1Vpp » Signal to Noise Ratio: 95dB » Operating Band: 5.8GHz » Sample Rate: 24bit/48kHz Uncompressed Digital Transmission » THD+Noise: <.05% (1kHz @ -10dbFS) » Range: 150 Feet* » Battery: Internal Lithium Rechargeable » Continuous Run Time: 4hr:30min » Charge Time: 2 Hours for full charge » Charging Voltage: 5V - USB » Charging Cable Included: Yes. Male USB to Dual Micro USB » Color: Black » Dimensions- Transmitter/Receiver: 3.7”W x 1.4”D x .5”H *Note: Range is dependent on RF environment including RF reflections, interference and absorption.
Kudos to Carvin. I've been using the unit a few hours in my shop without a stutter or burp. No tone lost even when used with a pedal board. This product competes against units at a much higher price point. I’m so satisfied I am purchasing a second for my wife. Buy This Product!!! - Peter S.
The SRS8 active bi-amplified studio reference monitor is simply one of the best near-field monitors on the market today. The SRS8 accurately reproduces multi-track recordings, surround mixes, mastering mixes, etc. with pinpoint precision. The SRS8 incorporates a built-in 130W two channel amplifier (70W low, 60W high) and an active crossover that delivers clean, transparent power without a hint of distortion or coloration. The 115-230V 50/60Hz power supply is compatible with most AC Mains worldwide. A LOW frequency adjustment switch is added so the user can adjust the proper low frequency balance depending on the monitor’s location and proximity to nearby surfaces which can boost bass response by several decibels.
SRS8 Specifications: »System Type: 2-Way Active Near Field Monitor » Frequency Response: 38Hz-22kHz (-10dB) » Crossover Frequency: 2.2kHz » Power: 130W (70W-low, 60W-high) » Input Impedance: 20k ohms balanced, 10k ohms unbalanced » Signal to Noise Ratio: >100dB typical A-weighted » Polarity: Positive signal at (+) input produces outward LF cone displacement » LF Driver: 8-Inch Kevlar woofer, 6 ohms » HF Driver: 1-Inch silk dome » Enclosure: Laminated MDF » Color: Black » AC Mains Input: 115V-230V (50-60Hz) » Fuse: T1.25A-250V 20mm x 5mm diameter » Net Weight: 26.4lbs (12kg) » Dimensions: 9.75W x 11.75”D x 15.125”H
Derek These totally slay my old Carvin and Roland monitors! They sound killer at any volume level and everything about them seems top notch. They are bi-amp powered with 70 watts low and 60 watts high. They have XLR and 1/4 TRS inputs with a 3 way low frequency switch for bass control. As a 25 year fan, user, and collector of Carvin Amps & Audio, I will continue to enjoy Carvin's past, present and future gear. Now, time to go play with some new toys!
Package Includes: 1- QX5A Active Monitor with 3 Channel Mixer 1 -Top Mount Mic Extension Pole with 3/8-16 and 5/8 adapters 1 -Microphone Stand Mount with 3/8-16 threaded adaptor
The QX5A is designed to function as both a powered near field monitor and as a three channel mixer/monitor with an external output to send to a QX15A or SCx Series powered main speaker for live performances. The QX5A is ideal for the solo performer who wants an all in one mixer/monitor with the ability to connect a larger active main speaker or amplifier for live performances in small to medium size venues. Houses of Worship can benefit from the compact near field design, allowing audio from the mixing console to be sent directly to the performer(s) on stage and allowing the performer to adjust his or her own volume and tone as needed.
QX5A »System Type: 5-inch, Active Near Field Monitor »Speaker Cabinet Frequency Response: 80Hz-14kHz (-10dB) 100Hz-10kHz (-3dB) »Three Channel Mixer »SYSTEM EQ: 3-Band with cut/boost +/- 15dB LOW 100Hz, MID 2.5kHz, HIGH 12kHz. »MIC/LINE IN to THRU Frequency Response: 20Hz- 20kHz »Power: 150W Program »Input Impedance: 20k 0hms »Sensitivity (1w/1m): 98dB »Maximum SPL: 114dB »Maximum Input Signal: +20dBu »Speaker: 5-Inch Woofer 6 Ohms »Enclosure: Virgin polypropylene »Color: Black »Grill: Black powder coated 18-ga steel »Transport: 1 Top Handle »Pole Mount: 16mm (0.63-inch) pole mount cup »Pole Mount Adapter: 3/8-16 »Top Mount: 3/8-16 »Top Mount Mic Extension Pole: 3/8-16 and 5/8 adapters. Extension Pole length is 6.75-inches »AC Input: 100V-230V (50-60Hz) »Fuse: T3.15A-250V 20mm x 5mm »Net Weight: 6.1lbs (2.8kg) »Dimensions: 11.25”W x 7.0”D x 8.0”H
The FDR60 - Filter Direct Box or DI box (Direct Injection Box) as it is sometimes called is a gig bag essential. Featuring a quarter inch input and balanced XLR outputs, the FDR60 is lightweight, compact, and built to last. It converts your instrument’s line level signal into a balanced XLR signal to send to a mixing board. Need to route your bass to the front of house and your amp at the same time? Simply plug in your bass, connect one output to your bass amp and the other to the mixing board and you’re good to go. It’s also perfect for use with keyboards, synthesizers, and acoustic guitars equipped with piezo pickups.
The FDR60 helps to eliminate ground buzz and hum and keeps your tone strong over long cable runs, ensuring that your performance goes off without a hitch. For added peace of mind, this unit also comes with an input attenuator and a ground lift.
Features: 1/4-Input & 1/4-Output Adjustable Attenuator Balanced XLR 3-pin male output Ground Lift with on/off switch Road worthy black anodized housing FDR60 Specifications : Input: 1/4-Inch 50k ohm unbalanced Outputs: 1/4-Inch (parallel with input) , XLR 3-pin male 600 ohm Balanced Frequency Response: 30Hz – 20kHz Attenuation : Yes , -20dB or -40dB Dimensions: 3.3” W (85mm) x 3.6 D” (92mm) Warranty: 90 Days
Bernie Hynson Jr "I Own the Carvin DI box…….Simple, Extremely quiet, light weight….and….COST EFFECTIVE!!!! Every guitarist, bassist and keyboard specialist should have AT LEAST one of these little 'BEAUTIES' in your gig wire bag…..for continuous use and for 'EMERGENCIES!!!'”
Rob Julian, CA "The FDR60 is built like a rock, we've been using Carvin gear at our church for years. Our old Carvin direct boxes have been used and abused over the years and still work perfect. We needed to pick up a couple more (for added instruments, we're still using and loving the old ones), and we're going to Carvin to get theirs. This is solid gear that lasts."
Ed Freitas Carson City, NV "I do pro sound and sound for my my own band and these are great for virtually any acoustic instrument, keyboard or any other instrument that sounds better with the DI boost that these offer. I recommend these highly, especially at this sale price range."