Menu
Carvin Audio
0
  • Audio
    • TRx5000 Line Array
    • TRC Column Array Systems
    • Subwoofers
    • Loudspeakers
    • Power Amplifiers
    • In-Ear Monitor Systems
    • Wireless Microphone Systems
    • Wireless Guitar/Bass Systems
    • Direct Box
    • Speaker Parts
  • Guitar
    • KOA Acoustic Guitar Preamp
    • X1
    • Legacy Drive- VLD1
    • MACH100 100W Pedal Amplifier
    • V112E Guitar Extension Cabinet
    • WG5 Wireless Guitar System
  • Bass
  • Blog
    • Audio Info & Education
    • Guitar/Bass Amp Info & Education
    • News and Events
  • SALE
    • On Sale Now
    • Gift Cards
  • Financing
  • Support
  • SINCE 1946
  • Sign in
  • Your Cart is Empty
Carvin Audio
Carvin Audio
  • Audio
    • TRx5000 Line Array
    • TRC Column Array Systems
    • Subwoofers
    • Loudspeakers
    • Power Amplifiers
    • In-Ear Monitor Systems
    • Wireless Microphone Systems
    • Wireless Guitar/Bass Systems
    • Direct Box
    • Speaker Parts
  • Guitar
    • KOA Acoustic Guitar Preamp
    • X1
    • Legacy Drive- VLD1
    • MACH100 100W Pedal Amplifier
    • V112E Guitar Extension Cabinet
    • WG5 Wireless Guitar System
  • Bass
  • Blog
    • Audio Info & Education
    • Guitar/Bass Amp Info & Education
    • News and Events
  • SALE
    • On Sale Now
    • Gift Cards
  • Financing
  • Support
  • SINCE 1946
  • 0 0

5 Reasons Not to Sing So Loud

July 10, 2022

For many new singers – and some veterans too – having a huge voice feels crucial, as if it were your only claim to fame. It is true – proving that you can belt it out so loud you don’t even need a mic can be impressive – and it can be handy in acoustic situations where you need to get heard.

But trying to go loud at all times isn’t always the best strategy. In fact, sometimes it can backfire on you and make you sound less professional, as well as taking a toll in other ways. Here are five reasons to back it down – at least sometimes.

1 – Longevity

First and foremost, as a singer, your voice is your instrument, and if that goes, you can’t sing at all. Obviously, you should always warm up before shows and rehearsals. But even warmed up, going loud all the time is an eventual strain on your vocal mechanism. This is especially true if your style is more about scream than projection. There’s nothing wrong that style – it defines rock and not all songs should sound operatic – but doing that a lot can wreck your voice. Do it too often for too long, and you might not be able to get it back.

2 – Timbre

Certain scream notes or loud belting notes can’t be done quietly. But on the other hand, attempting to get as loud as possible all the time limits control over your timbre. As it turns out, a lot of what you might be looking for is easier to accomplish at just a notch or two lower volumes. It’s not that you want to switch to whisper vocals ala Billie Eilish, it’s just about drawing back a little bit of the strain so you can find sweeter sounds.

3 – Range

The human voice is limited (unless you’re Freddie Mercury). It’s especially limited in the range of notes it can reach at top, full voiced, volume. Drawing back the volume can increase your range and make the switch between head voice and chest voice less obvious. If you sing notes in the sweet spot as loud as can be, when you get to a high note, you’ll either find yourself straining, missing the note entirely, or having to switch to a way quieter register. That could be weird sounding (it might also be cool, especially in the studio) – or it could cause that note to be lost in the mix, especially on a loud stage.

4 – Recording

Recording vocals is a subtle art, and there’s a difference between stage singing and studio singing. Although you want to represent your act well, there are certain technical facts at play in the studio. One is the obvious – if you’re too loud when the engineer doesn’t expect it, you could clip and ruin the take. That’s certainly avoidable with good level setting and compression, but something else is less obvious and can make vocal mixing difficult. That’s a magical and dangerous area in the vocal range around 2-3kHz. Some vocalists tend to hit that frequency really hard when they go into full on belt mode – especially tenors. That frequency does make vocals cut through the mix, but it can also be a nightmare to mix, because it can hurt the ears.

There are some mix techniques to take care of this, like dynamic EQ, but even then, it can be tricky. As it turns out, though, dialing back the intensity of those belty notes can smooth out this problem without making the track less impressive. Just remember, in the studio, you don’t need to struggle to get heard. If you relax, your vocals will be easier to mix – even the loud parts.

5 – Attention

Finally, there’s one thing that almost all new bands find out eventually. If you’re loud the whole show, people lose interest. That’s because loudness isn’t actually what keeps people focused. What really keeps people engaged is change. That’s why dynamic range is so important in mixing, song writing, arrangement, and in show craft. Building a compelling live set is all about keeping attention, so as a singer, if you’re a one trick pony who can only melt faces, you’ll be left with little way to keep attention. But if you can bring it down too, your loudness ability will be more impressive.

 

At the end of the day, singing is as varied as any other musical art. The more different things you can do, the better. It’s not to say you shouldn’t ever sing loud – it can be incredibly compelling when you hold out a note that makes you sound like Thor on steroids – it’s just that dialing it back is useful too.
  • Share:


Also in Audio Info & Education

Basics of Using Fills to Cover Audience Areas
Basics of Using Fills to Cover Audience Areas

March 24, 2025

A standard setup for live music is usually placing loudspeakers on the left and right side of the stage. This is ideal for covering the audience out front of the stage. However, there are many instances where a venue may have seating to the side, behind, or even at the foot of the stage where your speakers cannot not cover. This article will review a few tips on placing additional speakers to fill in those areas.

Read More

The Difference Between Point Source and Line Array Speakers
The Difference Between Point Source and Line Array Speakers

March 07, 2025

If you are a sound professional and are looking to step up to a line array, a column or 10” line array might suite you. The efficiency and clarity of column and line arrays are the best way to overcome coverage issues as you can run overall volume lower without sacrificing coverage.

Read More

TRX5000 Series Line Array Overview Video
TRX5000 Series Line Array Overview Video

November 05, 2024

Product features and overview of the TRX5000 Series line array and active subwoofer systems for large concert venues. TRX5000 Systems are scalable from 8 to 32 TRx5210AN active dual 10-inch neodymium elements.

Read More

Shop

Loudspeakers

Studio Monitors

Guitar Pedals

In-Ear Monitor Systems

Wireless Microphone Systems

Microphones

Gig Essentials

Speaker Parts

Rack Mount Systems

Gift Cards

TRx5000 Series

Sign up to get the latest on sales, new releases and more…

Contact Us   

Sign Up for SMS Notifications

International Sales

Warranty and Trial Period

Shipping

Manuals

NoFraud Frequently Asked Questions

Thiele/Small Parameters

Schematics

Firmware Download

Become a Dealer

About Us

"Make a joyful noise unto the Lord all of the earth; make a loud noise and rejoice and sing praises. Sing to the Lord with the harp and the voice of the psalm." - Psalm 98:4-5

© 2025 Carvin Audio. Carvin Corp.
POS and Ecommerce by Shopify

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa