- XP1000L 10 Channel Powered Mixer
- 2 PM153 Speakers
- 2 M68 Mics & Cables
- 2 C50S Cables
XP880L ControlsXP1000L Mixer:
Unlike anything in its class, the ultra light XP1000L Stereo 8 Channel powered mixer offers 1200 watts RMS (1600W peak) power from 3 power amplifiers for Left, Right, and a third power amplifier for floor monitors. Each XP1000L includes a USB power port for an iPod™ (MP3 player) or LED panel light. What's more impressive is its high power in only 15 lbs using our light-weight DCM power amp technology. While at the same time, the high efficiency "Green" Class D power amplifiers conserve power. So not only is this a great high power lightweight mixer, but it is environmentally friendly and cheaper to operate. Each of the 3 amplifiers delivers 400w RMS (530w Peak) at 4 ohms or 300w RMS (400w peak) at 8 ohms. High current Speakon™ and 1/4-inch speaker connectors are featured assuring every watt gets to your speakers. Each amp has it own LED output meter plus peak indicator.
Superb sound starts with 8 balanced XLR input channels, plus two channels with stereo inputs for a total of 10 inputs. Each channel features: professional low noise microphone pre amplifiers, Gain controls (first 6 channels), 3-band EQ, Effects, Main, and Monitor levels. The 6 continuously variable GAIN controls adjust the input levels to eliminate noise and input over-driving. Active Low Mid and Hi channel EQ controls plus three 7 band graphic EQ (R/L & Monitor) enhance intelligibility for Hi-Fi quality. The separate floor monitor graphic EQ allows the musicians to have their own EQ system and eliminate possible feedback associated with close monitoring. 2 internal DSP effects processors deliver over 256 effects each with independent level controls for both main L-R and for sending the effects back to the floor monitors.
- +48V Phantom power
- Music Break switch
- Durable all metal enclosure with protective end-caps
- Dimensions: 17" wide X 10" deep X 10.3" high
- Weight: 15 lbs
- Warranty: 1 Year
- Made in the USA
The PM153 is designed to stand alone as a full range sound reinforcement loudspeaker and to lay down for a full range monitor. Effective for both permanent and portable applications, it comes with 4 fly points, rubber footpads, and a 1-3/8-inch pole mount cup.
The PM153 incorporates premium components housed in a rugged, water resistant polypropylene enclosure making this is the most advanced system on the market today. Designed for medium size venues, the audience will hear crystal clear sound. The enclosure is made of molded virgin polypropylene it won't chip or crack and can with stand our drop tested at 3M (12.5 ft). The front is covered by a heavy gauge steel powder coated grill. The crossover includes two of Neutrik's combo Speakon and 1/4" phone connectors mounted on FR4 double sided circuit boards for solid construction and durability. Carvin's exclusive Speaker Guard™ HF Driver protection to dim the HF driver 10 dB protecting the voice coil from excessive power. The benefits are the driver is not turned off losing all the high frequencies, the circuit resets as soon as the high frequency content is back to normal levels.
- Club System
- House of Worship
- Band PA
- Satellite system
- The huge 2.5 inch voice coil is conservatively rated to sustain 1600w peak.
- Rugged water resistant virgin polypropylene enclosure. Won't chip or crack. Drop tested at 9 feet.
- The wide dispersion, asymmetrical high frequency horn offers maximum coverage from the first to last row.
- Carvin's exclusive enclosure design facilitates 30 degrees up and 45 degrees down and 90 degree horizontal dispersion - making them ideal for mains or monitors.
- Equipped with pole cups and 4 fly points, the PM's are ideal for installations or on tour.
- The PM advantage is it's sonic qualities with its crystal clear highs and rock solid bass at high levels.
Frequency Response: Mic or Line Inputs 20Hz-20kHz ±1dB
Total Harmonic Distortion: Less than .1% at nominal levels
Equivalent Input Noise: 150 ohm source: -117dBu
Output Noise: -90dBu Master Line Out (All Levels Minimum)
Output Headroom: +20dB
Maximum Gain: Mic in to Master Line Out: 70dB
Crosstalk: Adjacent channels -60db at 1KHz
Common Mode Rejection: -78db at 1KHz
Phantom Power: 48 volt @ XLR Mic channels
USB Power Port: 5 volt, 200mA for LED lighting or MP3 charging
Channel EQ 3-band active: LOW: 80Hz ±12dB, MID: 750Hz ±12dB, HI: 11.5KHz ±12dB
Power Output: 1200w (3x400w@4ohms) (3x300w@8ohms)
Power Req.: 120VAC 60Hz
Dimensions: 10.3" high x 17" wide x 10" deep
Weight: 15 lbs
System Type: 15-inch 3-Way, bass-reflex
Frequency Response: 50 Hz - 18 kHz (-10DB), 58 Hz - 17 kHz (-3 dB)
Coverage Pattern: 90H x 45V
Crossover: Speaker Guard™ HF protection
Crossover Frequency: 400Hz, 3.5 k Hz
Power: Continuous / Program / Peak, Full Range 400w /800w /1600
Recommended Amplifier Power: 400 - 1400w
Sensitivity (1w @ 1m): 96dB
Maximum SPL: 122dB / 128dB peak
LF Driver: 15-inch Heavy Duty Woofer
MF Driver: 6-inch Woofer
HF Driver: 1-inch exit 1.5-inch VC Titanium Driver
Nominal Impedance full range: 8 ohms
Enclosure: Virgin Polypropylene
Suspension/Mounting: 1-3/8-inch pole mount cup, 4 Fly Points
Transport: 2 Handles
Grill: Black steel
Connectors: Two Neutrik Combo 1/4-inch / Speakon
Dimensions (H x W x D): 27.875 in x 17.875 in x 13.125 in
Weight (each): 41.2 lbs
Bill Fick - Blackwater Delavan, WI
"Ran this for 24 hours straight at an outdoor Relay for Life event. Several acts and then a DJ used it. No problems! It was powerful, clean, and flexible. I chose the XP1000L over the competition and it was a easy choice. Great product & Made in the USA baby. Gives me options for small to medium venues. Paired with Carvin LM15 speakers you get a fantastic sound at a fair price. Thanks Carvin!"