- XP1000L 10 Channel Powered Mixer
- 2 PM12 Speakers
- 2 M68 Mics & Cables
- 2 C50S Cables
Unlike anything in its class, the ultra light XP1000L Stereo 8 Channel powered mixer offers 1200 watts RMS (1600W peak) power from 3 power amplifiers for Left, Right, and a third power amplifier for floor monitors. Each XP1000L includes a USB power port for an iPod™ (MP3 player) or LED panel light. What's more impressive is its high power in only 15 lbs using our light-weight DCM power amp technology. While at the same time, the high efficiency "Green" Class D power amplifiers conserve power. So not only is this a great high power lightweight mixer, but it is environmentally friendly and cheaper to operate. Each of the 3 amplifiers delivers 400w RMS (530w Peak) at 4 ohms or 300w RMS (400w peak) at 8 ohms. High current Speakon™ and 1/4-inch speaker connectors are featured assuring every watt gets to your speakers. Each amp has it own LED output meter plus peak indicator.
Superb sound starts with 8 balanced XLR input channels, plus two channels with stereo inputs for a total of 10 inputs. Each channel features: professional low noise microphone pre amplifiers, Gain controls (first 6 channels), 3-band EQ, Effects, Main, and Monitor levels. The 6 continuously variable GAIN controls adjust the input levels to eliminate noise and input over-driving. Active Low Mid and Hi channel EQ controls plus three 7 band graphic EQ (R/L & Monitor) enhance intelligibility for Hi-Fi quality. The separate floor monitor graphic EQ allows the musicians to have their own EQ system and eliminate possible feedback associated with close monitoring. 2 internal DSP effects processors deliver over 256 effects each with independent level controls for both main L-R and for sending the effects back to the floor monitors.
- +48V Phantom power
- Music Break switch
- Durable all metal enclosure with protective end-caps
- Dimensions: 17" wide X 10" deep X 10.3" high
- Weight: 15 lbs
- Warranty: 1 Year
- Made in the USA
The PM12 is designed to stand alone as a full range sound reinforcement loudspeaker for small systems. The PM12 can be laid on it's side for a 60 degree angled stage monitor. Effective for both portable and permanent applications, featuring a 1-3/8" pole mount cup.
- DJ system
- House of Worship
- Band PA
- Satellite system
The PM12 incorporates premium components housed in a rugged water resistant enclosure, designed for crystal clear sound in small to medium size venues. The high power drivers feature large magnet structures for high efficiency producing more output per watt than systems costing two to three times more. The woofer is protected by a heavy gauge steel powder coated grill. Two combination Speakon - 1/4" input jacks allow for versatile connections and chaining of speakers. Rubber foot pads on the bottom interlock with receptacles on the top for stacking two PM12s. The bottom pole mount cup offers universal mounting to pole stands and mounts.
Frequency Response: Mic or Line Inputs 20Hz-20kHz ±1dB
Total Harmonic Distortion: Less than .1% at nominal levels
Equivalent Input Noise: 150 ohm source: -117dBu
Output Noise: -90dBu Master Line Out (All Levels Minimum)
Output Headroom: +20dB
Maximum Gain: Mic in to Master Line Out: 70dB
Crosstalk: Adjacent channels -60db at 1KHz
Common Mode Rejection: -78db at 1KHz
Phantom Power: 48 volt @ XLR Mic channels
USB Power Port: 5 volt, 200mA for LED lighting or MP3 charging
Channel EQ 3-band active: LOW: 80Hz ±12dB, MID: 750Hz ±12dB, HI: 11.5KHz ±12dB
Power Output: 1200w (3x400w@4ohms) (3x300w@8ohms)
Power Req.: 120VAC 60Hz
Dimensions: 10.3" high x 17" wide x 10" deep
Weight: 15 lbs
- Voiced for mains FOH and monitor applications
- PM12 features a 2.5" LF voice coil
- 1.5" HF driver for pristine highs
- Asymmetrical wide dispersion horn for greater coverage
- Rugged Polypropylene injection-molded enclosure for extreme durability - drop tested to 8 ft.
- Integrated pole-mount cup for use with Speaker stands or pole mounted on top of a subwoofer
- Suspension points for permanent installation
- Freq. Resp.: 57 Hz to 18 kHz ±3 dB
- Useable LF: 46 Hz (-10 dB)
- Sensitivity: 100 dB SPL, 1 Watt @ 1 meter
- Impedance: 8 ohms
- Power Handling: 300w continuous, 600w peak
- Coverage Angles: 90° Horiz., 30°x45° Vert.
- Protection Circuits: Speaker Guard™
- Inputs: 1/4 inch and Speakon
- Enclosure Type: Vented
- Enclosure: Polypropylene
- Suspension mounts: Four points
- Dimensions: 16" wide x 13.125" deep x 24.375" high
- Weight (each): 29.6 lbs
Scott N. NJ
"Our working bar band needed a fresh PA and in my "less is more" aproach I sought a small but powerful package. The XP1000L delivered. With the onboard fx, effective EQ's and the power to cut through with clarity it is clearly the best value on the market. I puchased the package with the LM12's, cables and mics which made it an unbeatable value. The three amps run cool and clean with all the features we need to sound our best. One nice feature is the music break button. Once you have all your settings dialed in there is no need to dial everything down between sets. The light weight and compact size makes load-ins a breeze. Get one...you won't be disappointed."
Bill Fick - Blackwater Delavan, WI
"Ran this for 24 hours straight at an outdoor Relay for Life event. Several acts and then a DJ used it. No problems! It was powerful, clean, and flexible. I chose the XP1000L over the competition and it was a easy choice. Great product & Made in the USA baby. Gives me options for small to medium venues. Paired with Carvin LM15 speakers you get a fantastic sound at a fair price. Thanks Carvin!"
Jeff Johnson- Grayson, Georgia
XP1000L-PM12 System: I've known about Carvin for many years and honestly don't remember how I first heard of them. Good quality products, and a great value. Both customer service experiences have been excellent. Thinking I had a problem with the powered mixer, customer service was prompt and courteous in setting up an exchange. When I discovered my error and called to cancel the shipment for exchange, Joe was equally professional and understanding.