1 TRX3210 Line Array Element
Pair of SUREFLYTRX side mount brackets
The 10-inch, 3-way TRx3210 line array element is a full range system featuring two high-power transducers for the lo-end & mid-range, which provide very high coherence and definition. The high frequency section features two professional 1-inch exit Mylar diaphragm compression drivers mounted to a PurePath™ lens system. The PurePath™ horn lens is CNC machined from acoustically non-resonant Eastern Maple hardwood, providing a smooth, equal path length surface for pure, natural highs. The lens also places the horn drivers in correct time with the 10-inch drivers for the best phase alignment and transient response over the full frequency spectrum.
The 3-way design, with the operating frequency range divided into the low frequency band (80 Hz - 600 Hz), lo/mid band (80 Hz - 1500 Hz) and the very-high frequency band (1.5 kHz – 18.5 kHz) , offers high 131 dB SPL levels yielding perfect intelligibility. Continuous power: 500w, program: 1000w, peak: 2,000w. Impedance: 8 ohms.
Compact & Powerful
The TRx3210 is remarkably compact to make more room on the stage, plus they fit into containers for easy transport. For fast setups, the enclosures are stackable on the integrated foot receptors featured on the TRx118 18" or TRx1121 21" subwoofers using no hardware. The inherent 6 dB advantage from a line array design allows the rear audience to hear nearly the same levels as the front, which eliminates having to overpower the front.
Fly up to 16 Units
Fly up to 16 enclosures with the optional SureFlyTRx™ quick release pin rigging system, which is easily attached to each enclosure, and add the top support SureFlyTbar™ for a total height of only 16 feet by 24" wide. The TRx3210 serves as the key component in scalable, building-block systems comprising of multiple enclosures.
- High SPL
- Extremely low distortion
- Eastern Maple hardwood PurePath™ horn lens
- Passive crossover with bi-amp or full range switch
- DuraTec™ weather & UV resistant tour-tough finish
- 15mm Russian Baltic Birch 13-ply hardwood cabinet
- Flyable up to 16 enclosures with optional SureFly™ rigging
- Stackable up to 6 enclosures - no hardware required
- Dimensions: 23.6" wide x 11.8" high x 14.8" deep
- Weight: 50 lbs
- Made in the USA
For large line array systems, contact Carvin pro sound professionals at 800.854.2235 for assistance in designing and ordering your system!
System Type: Dual 10 Inch 3-Way, Reflex
Frequency Response: 70 Hz - 18.5 kHz (-10DB); 85 Hz - 16 kHz (-3 dB)
Coverage Pattern: 100H x 10V (number of cabinets changes vertical pattern)
Crossover: 3-Way Quasi with Speaker Guard™ HF protection
Crossover Frequency: 1.5 kHz (500 Hz LP one 10 Inch)
Power: Full Range 500w continuous /1000w program /2000w peak
Recommended Amplifier Power: 500 - 1000w
Sensitivity (1w @ 1m): 98dB
Maximum SPL: 125 dB Continuous / 131 dB Peak
LF Driver: 2x 10-inch drivers, 2 Inch Voice Coil
HF Driver: 2x 1-inch exit Drivers, 1.75 inch voice coil
Nominal Impedance Full Range: 8 ohms
Bi-amp LF: 8 ohms 500w /1000w /2000w
Bi-amp HF: 8 ohms 90w /180w /360w
Enclosure: Russian Baltic Birch
Suspension/Mounting: 7 captive 3/8in-16 nut fly points, Optional SureFly™ rigging, Two 1-3/8 pole mount cups
Finish: Black DuraTec™
Transport: 2 Recessed Handles
Grill: Black Powder-Coated Steel, Acoustically Transparent Foam Backing
Connectors: Two twist lock speaker connectors
Dimensions: (H x W x D): 11.8 in x 23.5 in x 14.8 in (300 mm x 600 mm x 376 mm)
Net Weight: 59 lb (27 kg) with Flyware
SureFlyTRx™ rigging kit 6.9 lb (3.1kg)
SureFlyTBar™ T-bar kit 11 lb (5kg)
TCSHK58 5/8” Shackle 1.3 lb (0.5kg)
Built in San Diego, CA
Akroz Professional Sound San Diego, CA
"The very first time out with the TRx3210 boxes, we were able to easily rig and fly both side in less than 45 minutes. Very easy and straight-forward setup. The horizontal dispersion was very close to 100 degrees and very even. The throw to the back of the venue (200 yards+) was very clear and intelligible."