TRC600A Column Array Package Includes:
The 10,000 watt TRC600A is a compact column array sound system featuring twice the subs and power of the TRC400A system. The TRC600A includes four TRx3903 columns and four TRx3018A powered subs. The coverage remains the same, 200 feet by 200 feet except with extended low frequencies. The added power from 5000 watts to 10,000 watts adds extra headroom with each TRx3903 having its own power amp instead of two columns sharing one amp. With Carvin’s CDD™ line array technology, the person in the front is not blasted by sound and the person in the rear hears crystal clear. The TRC600A brings the low frequencies to match the pristine highs for concert levels serving, main stages for events up to 1000 people. Like the other TRC systems, it can be set up in just a few minutes. For smaller events, use a portion of the TRC600A as a TRC400A or TRC200A system. Your main event will have unbelievable power and clarity from the column speakers.
Carvin's CDD™ technology used boasts a full bandwidth of smooth linear phase response with uniform projection from the front to the back of the venue. As you get close to the array, the level is clean and friendly while the back is loud and clear. The CDD™ technology eliminates the excessive "front row blare" and feedback caused by having to turn up conventional systems to reach the back of the event.
TRx3903 Column Array Speaker
The TRx3903 is the new era of high output, wide coverage loudspeakers with an incredible high output to size ratio. The TRX3903 is an ultra-compact column array element. Each column element consist of nine 3-inch high performance drivers with a 120 degree horizontal coverage. The technology used in TRx3903 produces a smooth linear phase response from 160Hz to 18kHz, and uniformly projects clear sound. For optimum performance, two column elements arrayed vertically per side with subs will evenly cover an area with high intelligibility and consistent SPL more effectively than conventional point-source designs. The TRx3903's slim 5-inch width, along with integrated top and bottom pole mounts make setup quick, easy, and visually unobtrusive. These columns are designed to be used with a sub woofer at all times.
TRx3018A Powered Subwoofer
The TRx3018A is an active 2500W, X-Drive DSP processed subwoofer with an additional amplifier output for running a top main cabinet. The TRx3018A is simply our finest single 18-inch powered subwoofer system featuring power for external cabinets. The high power, cast frame TS18B woofer features a deep 23mm, inside/outside wound, 4-inch voice coil with outstanding deep bass performance. Optimized presets for several Carvin cabinets are factory programmed for simple connect, select and play setup. The 2500W active X-Drive DSP processed module provides a 1500W bridged amplifier for the internal 18-inch subwoofer and an additional 1000W amplifier output for external main cabinets. The internal X-Drive DSP processing maximizes performance output and protection using up to 48DB/oct crossover filters, parametric EQ, alignment delay and limiters. Turn on the Enhanced Bass and the ultra low end will come alive, lowering the cabinet’s frequency response by another 15Hz and boosting the 35-50Hz response. The DSP will control the output to keep this added response within the limits of the speaker.
The TRC600A system is complete with cables, speaker interconnect poles and carry bag. Made in the USA.
TRx3903 Column Speaker Specs:
- System Type: CDD™ Column Array
- Frequency Response: 140 Hz – 18 kHz (-10DB), 160 Hz – 16 kHz (-3 dB)
- Coverage Pattern: 120H x 10V single cabinet
- Crossover: None
- Required Crossover Freq.: 160 Hz 24DB/oct
- Power (full range): 180w continous /360w program /720w peak
- Recommended Amplifier Power: 200w - 400w
- Sensitivity: 100dB (1w/ 1m); 97dB (1w/2m)
- Maximum SPL: 128dB Peak
- Driver: 9 x 3-inch drivers
- Nominal Impedance: 8 ohms
- Enclosure: 11-Ply Russian Baltic Birch
- Suspension/Mounting: 8 captive 3/8in-16 nut fly points; Two 1-3/8 pole mount cups (top and bottom)
- Finish: Black DuraTec™
- Grill: Black powder coated steel Acoustically Transparent Foam Backing
- Connectors: Two 4-pin twist lock connectors
- Dimensions: 31.5" high x 5" wide x 5.25" deep (800 mm x 127 mm x 134 mm)
- Weight: 21 pounds (9.5 kg)
- Made in San Diego, California
TRx3018A Powered Subwoofer Specs:
System Type: Active 2500W, X-Drive DSP controlled, 18 Inch Bass reflex
Freq. Response: 32 Hz – 1.5K Hz (-10DB), 38 Hz – 1K Hz (-3 dB)
Coverage Pattern: Omni - Cardioid in 8x Arrays
Crossover: Active DSP design
Crossover Freq.: Preset or Adjustable frequency at 24dB/oct.
Input Sensitivity: Variable 1.0, 1.2, 1.4, and 2.0 Vrms settings
Power: Internal Sub 1500W 20mS pulsed, External amplifier output 1000W
Maximum SPL: 131 dB Peak
Driver: 18 Inch, 4 Inch Voice Coil
Enclosure: 13 ply Russian Baltic Birch
Suspension: Three 1-3/8 pole mount cups
Finish: Black DuraTec™
Grill: Black Powder-Coated Steel, Acoustically Transparent Foam Backing
Connectors: One XLR male and One XLR female, Terminal block for remote volume/ mute.
Dimensions: 23.5" high x 23.5" wide x 23.5" deep (597 mm x 597 mm x 597 mm)
Net Weight: 86 lbs (39 kg)
Made in USA
Christian Palugod San Diego, CA
"The TRC systems have really improved the way I do mobile events. I first heard these systems back in 2014 and instantly became a fan. Now I can setup faster and at the same time provide greater sound coverage. The musical presence these systems provide is just unmatched by any of the traditional point source speaker systems out in the market. Every time I use them people always complement how good they sound."