The PM10A is designed to stand alone as a powered full range sound reinforcement loudspeaker for small systems. The PM10A can be laid on it's side for a 60 degree angled stage monitor. Coupling the PM10A with a subwoofer such as the LS1501 results in an ideal three way system with extended low end. Effective for both portable and permanent applications, featuring a 1-3/8" pole mount cup. Applications include:
- DJ system
- House of Worship
- Band PA
- Satellite system
- Standalone 3-Channel System
The PM10A incorporates premium components housed in a rugged water resistant enclosure, designed for crystal clear sound in small to medium size venues. The high power drivers feature large magnet structures for high efficiency producing more output per watt than systems costing two to three times more. The woofer is protected by a heavy gauge steel powder coated grill. Rubber foot pads on the bottom interlock with receptacles on the top for stacking two PM10As. The bottom pole mount cup offers universal mounting to pole stands and mounts.
Carvin's active PM10A speaker features a 3-channel mixer for connecting a microphone, instrument and tape/CD/MP3 player. This is ideal for solo or duo performances in venues such as coffee shops, small to medium size clubs or restaurants. Each channel has its own level control, and when used in conjunction with the 3-band EQ, allows you to tailor the output for optimal sound and performance. XLR, 1/4" and RCA inputs provide flexibility with the components you connect. An additional XLR output allows for easy daisy-chaining of additional active PM speakers for use as either mains or monitors.
- System Type: Internal Active System, 10-inch 2-Way, bass-reflex
- Frequency Response: 60 Hz - 18 kHz (-10DB)
- Crossover Frequency: 2.5k Hz
- Coverage Pattern: 90H x 30upV x 45downV
- Internal Amplifier full range: 400 Watts
- Maximum SPL: 122dB peak
- LF Driver: 10-inch Woofer
- HF Driver: 1-inch exit 1.5-inch VC Titanium Driver
- Enclosure: Molded Polypropylene Plastic
- Suspension/Mounting: 1-3/8-inch pole mount cup with clamp and 4 fly Points
- Transport: 1 side handles
- Grill: Black steel
- Connectors: Two XLRs (one Male, one Female), Two 1/4 TRS phone jacks, Two RCA jacks
- AC Power Requirement: 90-250VAC 50-60Hz
- Dimensions: 13" wide x 11" deep x 21.5" high
- Weight: 23.4 lbs
Allen Jeffrey of The County Roads Kansas City, Mo
"Just got these to use for our floor monitors, and just like all the CARVIN equipment I have used over the years, they take all the abuse and keep on rockin' solid through the night!!! I am using a high pass filter to keep anything under 80Hz from going through the DCM1000 amp that I'm using bridged mono at 4ohms running 2 of these PM10's. That puts 500 watts to each of these PM10s! Just remember to keep your setup running around 50% power continuous with only brief peaks getting close to the clip and these will be plenty powerful enough to use night after night! I will be buying more!"
Jeff Johnston Seattle, WA
"I'm trying to reduce the size and weight of my entire rig. Dumped my old mains and then realized my monitors weighed as much as my Neo 18" subs. Decided to try PM10's based on specs. They easily outperform my old 12" Yamahas for clarity and volume, sounding more like high-end stereo speakers than the honky midrange tone I was used to. We play loud on stage and these cut right through. They are small, light and convenient. They come with cool little brackets to tilt them up a little sharper which has helped at a couple of small venues. I am delighted. Huge improvement to my system besides getting me smaller, faster and more efficient."
Mike Guarniero, Hidden Valley Lake, CA
"Still surprised how a 10 inch speaker can sound so good. Been using Carvin products for 20 years. Great stuff"