Experience the freedom to move about the stage without the constraint of a wired instrument cable. The UX1200BGT Wireless Guitar System is the ideal solution for live music. One UX1200BGT can serve as 3 different workhorses in your inventory. Choose different accessories such as the PERFORMER 1T tan over ear headset microphone (also available in black) or the UX-LP1 lavalier microphone.
Simultaneous Channels in Operation : 14 System Type : Analog Group / Channel Selections : 6 Groups of 23 Channels Channel selection : Auto and Manual ( In .025MHz increment) RF Frequency Band : 506MHz - 542MHz RF Bandwidth : 36MHz Reception Format : True Diversity, PLL Synthesized Audio Output : XLR and 1/4-Inch outputs Receiver Type : Table Top or Rackmount Warranty: 90 Days
UX600B Belt Pack Transmitter Specifications : Input Connector: TA4F 4-pin XLR Frequency Response: 40Hz to 18kHz RF Output Level : 10mW or 50mW Battery : 2x AA, Not Included Lighted Mute Indicator: Yes Backlit Display: Yes Group and Frequency Selection : Yes, Manual and Auto Scan Sensitivity Adjust : Yes , -18dB /+12dB (3dB steps) Attenuation Control : Yes- Helps to manage extreme SPL input Lock Out : Yes Microphone Accessories : UX-HM3(Black), UX-HM3T(Tan), UX-LP1 Warranty: 90 Days
Experience Freedom with Wireless
The UX1200BGT package is the ideal solution for guitar and bass players looking to achieve more freedom on stage. Designed to faithfully reproduce every detail of your playing, the UX1200BGT delivers freedom without sacrificing sound quality.
The UX1200BGT wireless system is also perfect for bass players. With a wide frequency response range, the low notes are sure to come through with defined nuances.
The UX1200BGT wireless guitar and bass system transmits between the FCC approved spectrum of 506MHz and 542MHz.
Two internal RF receiving antennas constantly search the RF environment for the strongest signal to give you the best possible performance with minimal dropout.
Battery Status, Channel Groups, RF Environment Scan, MUTE, LOCK, Squelch, Attenuate and Gain adjust -18dB to +12dB make it easy to sound great at every show.
Transport and protect your wireless system with the available UX-DR Rackmount Kit. Mount two systems in a single rack space.
The WG5 Wireless Guitar/Bass System is designed to give you the wireless freedom you have been looking for and the simplicity to make your life as a working musician easier. Compact design coupled with an intuitive, easy set up makes going wireless an enjoyable process. The WG5 works with both active and passive instruments and is perfect for both electric and acoustic guitar/bass.
WG5 SPECIFICATIONS » Number of Channels: 4 » RF Power: 5mW (7dBm) » Frequency Response: 20Hz-20kHz (-3dB) » Maximum Input Voltage : 2.1Vpp » Signal to Noise Ratio: 95dB » Operating Band: 5.8GHz » Sample Rate: 24bit/48kHz Uncompressed Digital Transmission » THD+Noise: <.05% (1kHz @ -10dbFS) » Range: 150 Feet* » Battery: Internal Lithium Rechargeable » Continuous Run Time: 4hr:30min » Charge Time: 2 Hours for full charge » Charging Voltage: 5V - USB » Charging Cable Included: Yes. Male USB to Dual Micro USB » Color: Black » Dimensions- Transmitter/Receiver: 3.7”W x 1.4”D x .5”H *Note: Range is dependent on RF environment including RF reflections, interference and absorption.
Kudos to Carvin. I've been using the unit a few hours in my shop without a stutter or burp. No tone lost even when used with a pedal board. This product competes against units at a much higher price point. I’m so satisfied I am purchasing a second for my wife. Buy This Product!!! - Peter S.
The SRS8 active bi-amplified studio reference monitor is simply one of the best near-field monitors on the market today. The SRS8 accurately reproduces multi-track recordings, surround mixes, mastering mixes, etc. with pinpoint precision. The SRS8 incorporates a built-in 130W two channel amplifier (70W low, 60W high) and an active crossover that delivers clean, transparent power without a hint of distortion or coloration. The 115-230V 50/60Hz power supply is compatible with most AC Mains worldwide. A LOW frequency adjustment switch is added so the user can adjust the proper low frequency balance depending on the monitor’s location and proximity to nearby surfaces which can boost bass response by several decibels.
SRS8 Specifications: »System Type: 2-Way Active Near Field Monitor » Frequency Response: 38Hz-22kHz (-10dB) » Crossover Frequency: 2.2kHz » Power: 130W (70W-low, 60W-high) » Input Impedance: 20k ohms balanced, 10k ohms unbalanced » Signal to Noise Ratio: >100dB typical A-weighted » Polarity: Positive signal at (+) input produces outward LF cone displacement » LF Driver: 8-Inch Kevlar woofer, 6 ohms » HF Driver: 1-Inch silk dome » Enclosure: Laminated MDF » Color: Black » AC Mains Input: 115V-230V (50-60Hz) » Fuse: T1.25A-250V 20mm x 5mm diameter » Net Weight: 26.4lbs (12kg) » Dimensions: 9.75W x 11.75”D x 15.125”H
Derek These totally slay my old Carvin and Roland monitors! They sound killer at any volume level and everything about them seems top notch. They are bi-amp powered with 70 watts low and 60 watts high. They have XLR and 1/4 TRS inputs with a 3 way low frequency switch for bass control. As a 25 year fan, user, and collector of Carvin Amps & Audio, I will continue to enjoy Carvin's past, present and future gear. Now, time to go play with some new toys!