XP800L-PM12 6 Channel PA System

Made In USA

List:$1,099.00 $749.00
-
+
$749.00

Package Includes: 
- XP800L Mixer
- 2 PM12 Speakers
- 2 M50 Mics & Cables
- 2 C50S Cables

XP800L Powered Mixer: 


The ultra light XP800L Stereo 6 Channel powered mixer features 8 inputs and an impressive 750 watts peak power from 2 amplifiers all in a compact 10 lbs enclosure. Each XP800L features a USB power port for an MP3 player or LED panel light. Each amp delivers 250w RMS (375w peak) at 4 ohms or 140w (210w peak) at 8 ohms. Left and Right power amps can be switched to Main/Monitor driving both main speakers and floor monitors. With this much power, the XP800L can cover audiences up to 300 people. The high efficiency "Green" Class D power amplifiers conserve power so they are more environmentally friendly and cheaper to operate. Two 1/4-inch speaker connectors are featured on the front panel for fast set up. 

Great sound starts with 6 balanced XLR input channels, plus two channels with stereo RCA inputs for a total of 8 inputs. Each channel features professional low noise microphone pre amplifiers, Gain switches (first 4 channels), 3-band EQ, Effects, Main and Monitor levels. The GAIN switch adjusts the input level for the optimal setting for both microphone and line level inputs. Active Low, Mid and Hi channel tone controls plus the stereo 7 band graphic EQ enhance the overall intelligibility. The internal DSP effect processor delivers over 256 effects with level controls for both main L-R and for sending the effects back to the floor monitors. 

Other features: 

- +48V Phantom power
- Durable all metal enclosure with protective end-caps
- Auto switching 120-240 VAC 50-60 Hz
- Dimensions: 13.5" wide X 9" deep x 7.5" high
- Weight: 10 lbs
- Warranty: 1 Year
- Made in the USA

The XP800L is the highest powered, lightest mixer on the market today. 

PM12 Speakers: 

The PM12 is designed to stand alone as a full range sound reinforcement loudspeaker for small systems. The PM12 can be laid on it's side for a 60 degree angled stage monitor. Coupling the PM12 with an LS1501 15" subwoofer results in an ideal three way system with extended low end. Effective for both portable and permanent applications, featuring a 1-3/8" pole mount cup. Applications include: 

- DJ system
- House of Worship
- Band PA
- Satellite system

The PM12 incorporates premium components housed in a rugged water resistant enclosure, designed for crystal clear sound in small to medium size venues. The high power drivers feature large magnet structures for high efficiency producing more output per watt than systems costing two to three times more. The woofer is protected by a heavy gauge steel powder coated grill. Two combination Speakon - 1/4" input jacks allow for versatile connections and chaining of speakers. Rubber foot pads on the bottom interlock with receptacles on the top for stacking two PM12s. The bottom pole mount cup offers universal mounting to pole stands and mounts.

XP800L Mixer: 

Frequency Response: Mic or Line Inputs: 20Hz-20kHz ±1dB
Total Harmonic Distortion: Less than .1% at nominal levels
Equivalent Input Noise: 150 ohm source: -117dBu
Output Noise: -90dBu Master Line Out (All Levels Minimum)
Output Headroom: +20dB
Maximum Gain: Mic in to Master Line Out: 70dB
Crosstalk: Adjacent ch’s: -60db at 1KHz
Common Mode Rejection: -78db at 1KHz
Phantom Power: 48volt @ XLR Mic channels
Channel EQ 3-band active: LOW: 80Hz ±12dB, MID: 750Hz ±12dB, HI: 11.5KHz ±12dB
Power Output: 2x250w RMS@4ohms, 140w RMS@8ohms
Power Req.: 120VAC 60 Hz or 240VAC 50 Hz auto switching
Dimensions: 13.5" wide x 9" deep x 7.5" high
Weight: 10 Lbs

PM12 Speakers: 

- Voiced for mains FOH and monitor applications
- PM12 features a 2.5" LF voice coil
- 1.5" HF driver for pristine highs
- Asymmetrical wide dispersion horn for greater coverage 
- Rugged Polypropylene injection-molded enclosure for extreme durability - drop tested to 8 ft.
- Integrated pole-mount cup for use with Speaker stands or pole mounted on top of a subwoofer
- Suspension points for permanent installation
Freq. Resp.: 57 Hz to 18 kHz ±3 dB
Useable LF: 46 Hz (-10 dB)
Sensitivity: 100 dB SPL, 1 Watt @ 1 meter 
Impedance: 8 ohms
Power Handling: 300w continuous, 600w peak
Coverage Angles: 90° Horiz., 30°x45° Vert.
Protection Circuits: Speaker Guard™
Inputs: 1/4 inch and Speakon
Enclosure Type: Vented
Enlosure: Polypropylene
Suspension mounts: Four points
Dimensions: 16" wide x 13.125" deep x 24.375" high
Weight (each): 29.6 lbs

Recently Viewed Products