TRxSYS3A Package Includes:
TRx 2000 Series Speakers
Carvin's TRx 2000 Series loudspeakers are a high performance solution for bands, audio companies and concert venues. They feature the latest innovations for optimal performance of both live and music playback. The TRx loudspeakers include point source, monitor and subwoofer solutions – all with the goal of providing the best sound at high SPL levels. The TRx Series are made from road worthy multi-ply Baltic Birch and covered in weather and UV resistant Duratec™ coating. Steel powder coated grills, handles, pole mounts and fly points provide the means for set-up and installation. These high performance systems are designed for today's pro audio applications and are protected by a 5 year warranty.
The TRx2153A is an active 2500 watt tri-amped, compact trapezoidal, 3-way enclosure. The trapezoidal design allows multiple cabinets to work together as an array cluster for very wide coverage. The horn loaded mid range and high frequency drivers offer tighter pattern control down to 500Hz for more precise clearer placement of audio where you want it. Twelve internal fly points provide connection for overhead suspension. The TRx2153A 3-way system will provide the best sonic details in the highs, mids, and low frequencies. It's equipped with our TS15-8, a high power cast 15-inch woofer featuring a 3-inch voice coil with a low heat high peak power capacity design, a horn loaded 8-inch mid range with a 2-inch voice coil, and a 1.4-inch High frequency large format driver with a 2.5-inch titanium diaphragm for clean and clear highs from 20khz all the way down to 1100Hz. The enclosure is constructed and braced with CNC machined 13-Ply Premium Russian Baltic Birch plywood. The front grill is powder coated steel with acoustically transparent foam backing for a cleaner look and added protection.
The TRx2153A's 2500W Active, X-Drive DSP processed, tri-amp module features Input and Thru balanced XLR connectors, Input volume level, Terminal Block remote level/Mute Control, and Input and Thru locking IEC AC power plugs. The 2500 Watts is divided into four amplifiers a 1500W bridged amplifier pair for the 15-inch woofer, a 500W amplifier for the mid range 8-inch driver and a 500W amplifier the 1.4-inch exit high frequency driver. The internal X-Drive DSP processing maximizes performance output and protection using up to 48DB/oct crossover filters, parametric EQ, alignment delay, and limiters. The module features two selection buttons for the over all cabinet EQ mode and for the Bass mode.
The TRx2218B is our powerful dual 18-inch subwoofer system. The high power, 18-inch woofers features a 4-inch voice coil with low temperature high peak power capacity. The box is designed with four deep large corner located ports producing a very strong structure, and coherent sub frequency output vertically and horizontally. The added strength rigidity of the corner ports puts all the force of the speaker out the front and into the room, and not wasted on the walls vibrating. This provides the idea low frequency coupling in multi box clusters, both in the horizontal and vertical positions. It features foot locating holes on top for stacking another TRx2218B and for stacking up to 4 TRx3210 line array elements without hardware. Top centered pole mount for suspending a TRx2115 or TRx12N. The enclosure is constructed of CNC machined 13-Ply Premium Russian Baltic Birch with heavy gauge steel powder coated front grills. The crossover includes two 4 pin twist lock high current connectors mounted on FR4 double sided circuit boards for solid construction and durability.
DCM3800Lx Power Amp
The 3800 watt DCM3800Lx amplifier can be configured for stereo, parallel, bi-amped, or bridged outputs. The System Quick Setup feature makes output routing and crossover configuration easy. Loadable Speaker Presets tuned for specific CARVIN speaker cabinets provide optimized settings to get the most out of each element in your system. The DCM3800Lx includes 30-band graphic EQs on each input, 4 parametric EQs on each output with high and low crossover filters; Bessel, Butterworth or Linkwitz-Riley (6 to 48dB/oct.), Limiters with Threshold, Phase, and Delays up to 120mS for distance or for individual driver alignments. Onboard memory has enough storage for 16 complete system configurations with settings for multiple loudspeakers and line arrays, or store unlimited configurations on your laptop. Premium 24-bit A/D and D/A converters offer low noise with full 20-20kHz bandwidth with extremely low latency processing.
The DCM3800Lx front panel features a high-contrast 2x16 character display for clear and easy navigation through settings. LEDs for Signal, 50%, 80%, Clip and Protect monitor the status of the amp. Detented level controls prevent unexpected level changes. Balanced XLR and TRS input connectors are used to reject hum & noise. A Ground Lift switch removes the chassis ground from the inputs. Outputs feature heavy duty binding posts and Twist-Lock connectors allowing bi-amp routing on a single 4-pin cable with no adapters.
TRx2153A Active Speakers
System Type: 2500W active tri-amp, X-Drive DSP processed, 15 Inch 3-way
Freq. Response: 50 Hz – 20 kHz (-10DB)
Coverage Pattern: 80H x 50V
Crossover: Tri-amp active DSP design
Crossover Frequency: 500 and 1.1 kHz
Sensitivity: 1.4Vrms, volume level full.
Power: 2500W 20ms burst (1500W, 500W, 500W)
Maximum SPL: 134 dB Peak
LF Driver: 15 Inch, 3 inch voice coil
MF Driver: 8-inch, 2 inch voice coil
HF Driver: 1.4-inch exit, 2.5 inch voice coil
Enclosure: 15mm 13 ply Russian Baltic Birch
Suspension: 12 captive 3/8in-16 nut fly points
Finish: Black DuraTec™
Grill: Black Powder-Coated Steel, Acoustically Transparent Foam Backing
Connectors: One XLR male and One XLR female, terminal block for remote volume/mute
Dimensions: 41" high x 19" wide x 17" deep
Net Weight: 83 lbs (38 kg)
Rigging Accessories: TCSHK10 3/8-16 Eyebolt, TCSHK58 5/8 Shackle
Made in the USA
System Type: Dual 18-inch Sub, bass-reflex
Frequency Response: 32 Hz – 2K Hz (-10DB), 38 Hz – 1.5K Hz (-3 dB)
Coverage Pattern: omni
Crossover: none internal
Crossover Frequency: recommended 90-150 Hz
Power: Continuous / Program / Peak Full Range 1600w /3200w / 6400w
Recommended Amplifier Power: 2000 – 3200watts
Sensitivity (1w @ 1m): 102dB
Maximum SPL: 130dB Cont/ 136dB Peak
LF Driver: Dual 18-inch Cast Frame 4-inch VC
Nominal Impedance full range: 4 ohms
Enclosure: 13-Ply Premium Russian Baltic Birch
Finish: Black DuraTex™
Transport: 4 Recessed Handles, optional CTS44 casters
Grill: Black powder coated steel, Acoustically Transparent Foam Backing
Connectors: Two 4-pin twist lock connectors
Dimensions (H x W x D): 22.5" high x 40" wide x 28.75" deep (600 mm x 1020 mm x 726 mm)
Weight: 138.6 lb (62.8 kg)
Made in San Diego, California
DCM3800Lx Power Amps
XLR IN: 20kΩ balanced, ground lift switch, 1/4" TRS IN and XLR THRU in parallel
Maximum Input: +10dBu
Output Connectors: 4-pin Twist-Lock and binding posts
Frequency Response: 20Hz-20kHz +/-1.5dB
THD: <0.1% @50%, <0.2%@90%, <1%@ rated power (1kHz, EIA)
2 channels: 8Ω 700w; 4Ω 1150w; 2Ω 1800w
Bridged: 8Ω 2300w, 4Ω 3800w
DIGITAL SIGNAL PROCESSING:
Multi DSP 48kHz/24 bit
30-band Graphic EQ (each input): 20Hz to 20kHz, +/-12dB in 0.5dB steps
Gain: +12dB to -68dB in 0.5dB steps
Source Routing with Amp Bridging
Phase: 0 or -180 degrees (in or out)
High pass and Low pass (Crossover) Filters:
- Butterworth: 6, 12, 18, 24, 48 dB/oct.
- Bessel: 12, 24 dB/oct.
- Linkwitz-Riley: 12, 24, 48 dB/oct.
Limiter: 0dB to -30dB threshold, hard limiting in 1dB steps
Delay: 0-120mS in 21uS steps (0-120ft in 0.28in steps, or 0-40 meters in 7mm steps)
4-band Parametric EQ’s (per output): +/- 12dB in 0.5dB steps, 0.16 to 2.0 octaves(Q)
Global System settings:
- Input sensitivity: 0.7, 1.0, 1.2, 1.4 or 2.0 Vrms
- Turn On Mute: On/Off
- Security Lockout with user-definable password sequence
- System Preset memory storage locations: 16
- USB: type "B" jack, compatible with USB 1.1 or higher, for internal firmware updates, or remote Xdrive™ software control
2 Rack Space
Dimensions: 19" wide x 3.5" high x 11" deep (483mm x 90mm x 280mm)
Weight: 15 lbs (6.8 kg)
Power: 100, 120 or 240 VAC models, 50/60Hz standard IEC inlet (V-lock™ compatible)
Internal fuses: SLOW BLOW
DCM2000Lx: 100V or 120V: 15A, 240V: 15A
Made in San Diego, California